TRUKD Kayak/Gear Mount

Overview

Two 3/16" aluminum T-slot brackets for TRUKD T Series and A Series bed racks. Accepts kayak carriers, ski/snowboard racks, and fishing pole holders, or adds 1-3/8" of RTT clearance as a tent riser. No-drill install; compatible with all T Series heights and the A Series.

Key features

• 3/16" aluminum construction with textured black powder coat finish matching the T Series crossbar profile
• Universal T-slot attachment — no drilling, fits all T Series heights (6.5", 12.5", 18.5", 24.5", Double Decker) and the A Series
• Dual function: gear carrier mount (kayak racks, ski/snowboard, fishing poles) OR 1-3/8" RTT height riser
• Includes: 2 brackets + T-nuts, machine screws, and Loctite threadlocker
• J-hooks not included — accepts standard J-hook hardware from Malone, Yakima, Thule, and most other brands
• Lifetime warranty, made in Pittsburgh, PA

Use cases

Best fit for T Series and A Series owners who rotate gear through the same rack setup across seasons. The brackets provide the T-slot attachment point for aftermarket kayak J-hook carriers (Malone, Yakima, Thule all fit standard patterns), ski and snowboard racks, and fishing pole holders. The RTT riser application is especially useful on 6.5" and 12.5" racks where tent-to-cab clearance is tightest — the 1-3/8" gain can make the difference between a shell that opens cleanly and one that clips the rear cab glass.

• Material: 3/16" aluminum plate
• Finish: Textured black powder coat
• Weight: 2 lb (907g) per pair
• Quantity in box: 2 brackets + attachment hardware (T-nuts, machine screws, Loctite)
• Attachment type: T-slot T-nuts + machine screws — no drilling required
• RTT riser height gain: 1-3/8" per bracket pair
• Compatibility: All TRUKD T Series heights (6.5", 12.5", 18.5", 24.5", Double Decker), A Series
• J-hooks included: No — sold separately
• Country of manufacture: USA (Pittsburgh, PA)
• Warranty: Lifetime (manufacturer's defect)

Do kayak J-hooks come with this?

No. The Kayak/Gear Mount includes the two aluminum mounting brackets and all attachment hardware for securing them to the crossbar. J-hooks, kayak saddles, ski straps, and pole holder hardware are all sold separately. Standard J-hook hardware from Malone, Yakima, and Thule fits the bracket mounting pattern.

What's the load rating for the brackets?

TRUKD doesn't publish a per-accessory load figure for the Kayak/Gear Mount. The T Series crossbar system overall is rated 300 lb per set while driving and 1,000 lb parked — the bracket assembly is not the limiting factor. For heavy sit-on-top kayaks (50–80 lb), stay within the crossbar system's overall driving rating.

Does it fit the A Series as well as the T Series?

Per TRUKD's FAQ, all gear mounts are designed to work with both T Series and A Series racks. Both systems use standard 8020 aluminum extrusion crossbars with T-slot channels. If you're on an A Series, verify your crossbar profile matches before ordering — TRUKD's product page confirms T Series compatibility explicitly.

How does it attach to the crossbar?

T-nuts slide into the T-slot channel on the crossbar; machine screws run through the bracket into the T-nut. No drilling into the truck or the rack. The included Loctite threadlocker keeps the fasteners from backing out under road vibration. Total install time is under 15 minutes per bracket pair.

Can I use this as an RTT riser on a 6.5" rack?

Yes. The riser function works on all T Series heights. The two brackets stack between the tent base and the crossbar, adding 1-3/8" of clearance. On the 6.5" rack where clearance is tightest, this is one of the more practical uses for a set of these brackets.

Will it work with non-TRUKD bed racks?

Yes, if your rack uses standard T-slot aluminum extrusion. You'll need to source T-nuts that match your extrusion's slot dimensions — the hardware included is sized for TRUKD's 8020 profile. The brackets themselves are not rack-brand-specific.