Thor's Lightning Portable AirVault2 Hard Case
Thor's Lightning Portable AirVault2 Hard Case
The Thor's Lightning Portable AirVault2 (Solo) is a lockable, water-resistant hard case plus a universal mounting bracket for a 12V portable air compressor. It is the case and bracket only. No compressor and no air tank are included. You bolt your own 12V unit to the bracket and carry the whole air kit as one sealed, locking box.
The bracket holds the compressor steady so it doesn't slide or rattle when you mount the case in a truck bed, cargo area, or rig storage. The case footprint runs about 20 x 16 x 9 inches and ships at 5 lbs on its own. Latches lock, the shell shrugs off splash and dust, and a carry handle lets you grab the kit and go. Treat it as splash- and dust-resistant rather than submersible; the maker rates it "extreme water resistant" but publishes no IP number.
The bracket is sized for common 12V portable compressors, including the Thor's Lightning Bolt (Gen1/Gen2), MorrFlate TenSix, EZ Flate M.O.A.B., and SmittyBilt 2781. Check your unit's footprint against the bracket before you mount it. In the box: the hard case and the mounting bracket.
Couldn't load pickup availability
Overview
The AirVault2 Solo is the lockable hard case and universal mounting bracket for a 12V portable air compressor. Case and bracket only; no compressor or air tank is included.
Key features
- Lockable hard case, about 20 x 16 x 9 inches, rated by the maker for extreme water resistance (no published IP number)
- Universal mounting bracket secures a 12V compressor so it won't slide or rattle in transit
- Fits common portable units: Thor's Lightning Bolt (Gen1/Gen2), MorrFlate TenSix, EZ Flate M.O.A.B., SmittyBilt 2781
- Carry handle and locking latches turn your air kit into one grab-and-go box
- Ships at 5 lbs on its own (case + bracket)
Use cases
Built for overlanders who run a 12V compressor and want it organized, protected, and mountable. Bolt the compressor to the bracket, drop it in the case, and the whole air kit stows in a truck bed or cargo area as one sealed, lockable unit ready for airing up after a trail run.
- Includes: Lockable hard case + universal compressor mounting bracket
- Compressor: Not included (Solo configuration)
- Air tank: None (this is a case, not a reservoir)
- Case dimensions: ~20 x 16 x 9 in
- Case + bracket weight: ~8.4 lb
- Shipping weight: 5 lb (2268 g)
- Water resistance: Maker-rated "extreme water resistant"; no published IP rating
- Locking: Lockable latches
- Bracket fitment: Thor's Lightning Bolt Gen1/Gen2, MorrFlate TenSix, EZ Flate M.O.A.B., SmittyBilt 2781
- SKU: THOR-AV2SOL
Does this include the air compressor?
No. The AirVault2 Solo is the lockable hard case plus the universal mounting bracket only. You supply your own 12V portable compressor and bolt it to the bracket.
Is there an air tank or reservoir inside?
No. Despite the "AirVault" name, this stores no compressed air. The "vault" is the protective case that carries and mounts your compressor.
Which compressors fit the bracket?
The bracket is sized for common 12V portable units, including the Thor's Lightning Bolt (Gen1/Gen2), MorrFlate TenSix, EZ Flate M.O.A.B., and SmittyBilt 2781. Measure your unit's footprint against the bracket before mounting.
Is the case waterproof?
The maker rates it "extreme water resistant," but no official IP number is published. Treat it as splash- and dust-resistant for trail and bed use, not as a submersible case. Keep the latches and seal clear of grit so it keeps sealing well.