RotopaX Deluxe Pack Mount
RotopaX Deluxe Pack Mount
The RotopaX Deluxe Pack Mount is a dual-arm DLX mount that clamps any RotopaX or FuelpaX container to a flat surface. It measures 4 x 1 x 3.375 inches and ships with a 4-inch disc plate that spreads the load and clears rack slats. One mount holds one container, in any size from 1 to 4 gallons.
Two independent arms spin down onto the container's molded dimples and secure separately, so the can sits tight against its surface with no rattle on washboard roads. That two-arm design is the difference between the DLX and the single-T-handle standard mount: more clamping force, and far easier to break loose when you pull the can at camp. The trade-off is honest — the DLX rides a touch taller off the surface than the lower-profile standard mount.
Bolt the disc plate to any flat mounting point — bed rack, tire carrier, trailer tongue, RTT crossbar, or cargo basket. Mounting hardware is sized to your surface, so you supply the bolts. Want to carry two cans on one footprint? The DLX is the recommended mount for stacking; add a RotopaX Extension (sold separately, sized to the bottom can) and a second container threads on top.
Couldn't load pickup availability
Overview
The Deluxe Pack Mount is RotopaX's dual-arm DLX mount. It bolts to any flat surface and clamps a single RotopaX or FuelpaX container down tight with two independently tightening arms. Fits every container size, 1 through 4 gallons.
Key features
- Dual-arm DLX clamp — two arms spin down onto the container's molded dimples and secure separately for more clamping force than a single-handle mount.
- Universal RotopaX/FuelpaX fit — one mount holds any RotopaX or FuelpaX container (1, 1.75, 2, 3, or 4 gallon).
- 4-inch disc plate included — spreads load on flat surfaces and clears rack slats; you supply surface-specific bolts.
- Easy on/off — designed to loosen quickly for frequent removal at camp, unlike a single T-handle that can seize in the heat.
- Stack-ready — recommended DLX mount for stacking two cans with a separate Extension.
Use cases
Built for overland and off-road rigs carrying spare fuel, water, or storage packs on a bed rack, tire carrier, or trailer. Owners who pull their cans on and off often pick the DLX specifically because it loosens fast, and the universal fit means one mount style covers fuel, water, and storage RotopaX packs across a build.
- Mount dimensions: 4 x 1 x 3.375 in (L x W x H)
- Ship weight: 635 g (~1.4 lb)
- Handle type: Dual-arm DLX clamp
- Included plate: 4-inch disc/adapter plate
- Container compatibility: All RotopaX and FuelpaX containers (1, 1.75, 2, 3, 4 gallon)
- Containers per mount: 1 (stack a 2nd with a separate Extension)
- Mounting surface: Any flat surface — rack, carrier, tongue, basket
- Hardware: Surface-specific bolts supplied by user
Does it fit all RotopaX and FuelpaX containers?
Yes. The Deluxe mount fits every RotopaX and FuelpaX container, from the 1-gallon up to the 4-gallon. One mount holds one container — match the number of mounts to the number of cans you're carrying.
What is the difference between the Deluxe (DLX) and the standard mount?
The standard mount uses a single T-handle; the DLX uses two arms that tighten down separately. The DLX delivers more clamping force and is much easier to loosen — owners who pull cans on and off frequently prefer it. The standard mount sits a little lower and flatter if a minimal profile matters more than easy removal.
Where can I mount it?
Bolt the included 4-inch disc plate to any flat surface: a bed rack, tire carrier, trailer tongue, RTT crossbar, or cargo basket. Mount it to a solid rack or carrier rather than thin sheet metal — fuel weight plus trail vibration will work a poorly backed plate loose.
Does it include a mounting plate and hardware?
It includes the 4-inch disc/adapter plate, which spreads the load and clears rack slats. You supply the bolts, since the right hardware depends on the surface you're bolting to.
Can I stack two cans on one mount?
Yes, up to two, and the DLX is the recommended mount for it. Add a RotopaX Extension (sold separately, sized to your bottom container) that threads into the mount and becomes the post for a second can on top.
Will it hold on rough roads?
Yes, if you set it right. Snug both arms and tug-test the can before you drive, then re-check tension after the first hot day and periodically on washboard roads — UV and vibration loosen any clamp over time, and the dual arms re-tighten in seconds.