RacksBrax HD Hitch (Triple)
RacksBrax HD Hitch (Triple)
The RacksBrax HD Hitch (Triple) is a three-point quick-release mounting set for awnings and rack accessories. It ships with three UV-stabilised, glass-reinforced nylon hitches and stainless steel fasteners. "Triple" is the count that matters: three hitches means three mounting points and a 60kg total load (20kg per point), versus the Standard Double's two points and 40kg ceiling.
The "HD" tells you the fit. HD hitches clamp onto spine-track spacings of 40 to 52mm — the range you find on most pull-out awnings, shower tents, and some wing-style awnings. If your awning runs the wider 100-120mm track, that is XD territory, not this kit. Measure your track centres before you order.
Bolt the hitches to your bars and awning once, and after that the awning lifts off and snaps back on in seconds. The third mounting point is the whole reason to step up from the Double: it spreads the load on long or heavy awnings so they don't sag or twist, and it keeps things planted on corrugated tracks. One Triple kit covers one awning.
Couldn't load pickup availability
Overview
The RacksBrax HD Hitch (Triple) mounts an awning or rack accessory at three points for quick on/off removal. It suits HD-class awnings with 40-52mm spine-track spacing and carries up to 60kg total.
Key features
- Three UV-stabilised, glass-reinforced nylon hitches per kit
- Three mounting points; 60kg total load (20kg per point)
- Fits spine-track spacing of 40-52mm (HD class)
- Stainless steel fasteners included
- Quick-release: awning off and back on in seconds once installed
Use cases
Built for long or heavy pull-out awnings, ensuite/shower tents, and conduit tubes that need a third support point the Standard Double can't give. The third hitch keeps long awnings from sagging or twisting and holds steady on rough, corrugated tracks.
- Mounting points: 3
- Hitches per kit: 3
- Max load (total): 60kg
- Max load (per point): 20kg
- Spine-track spacing: 40-52mm (HD class)
- Hitch material: UV-stabilised, glass-reinforced nylon
- Fasteners: stainless steel, included
- Fits: pull-out awnings, shower/ensuite tents, conduit tubes, some wing awnings
- Quick-release: yes
- SKU: RBUS8182
- Ship weight: 1814 g
How is the Triple different from the HD Standard (Double)?
The Triple has three hitches and three mounting points with a 60kg total load. The Standard Double has two points and a 40kg ceiling. Both fit the same 40-52mm track. Step up to the Triple for long or heavy awnings that need a third support point.
Will it fit my awning?
It fits awnings and accessories with a spine-track spacing of 40 to 52mm — most pull-out awnings, shower tents, and some wing-style awnings. Measure your track centres first. Wider 100-120mm tracks need the XD range instead.
What is the load limit?
60kg total across all three points, which works out to 20kg per point. Don't put more than 20kg on any single point, even if the total stays under 60kg.
How many kits do I need?
One Triple kit mounts one awning at three points. If you're mounting two awnings, you need two kits.
How fast can I take the awning off?
Once the hitches are bolted to your bars and to the awning, removal is quick-release — the awning lifts off and snaps back on in seconds, no tools.
What is it made of and does it need maintenance?
UV-stabilised, glass-reinforced nylon hitches with stainless steel fasteners. The nylon holds up to sun exposure and the stainless hardware resists rust, so there's no special upkeep.