Jeep Gladiator JT Attic — Overhead MOLLE Storage
Jeep Gladiator JT Attic — Overhead MOLLE Storage
The Jeep Gladiator Attic is an overhead mesh storage net cut and strapped for the Jeep Gladiator (JT), 2020 and newer. It mounts in the dead space above the rear seat, wrapping mil-spec straps around the factory roll bar — no drilling, no brackets, no holes. The mesh compartment measures 40 x 17.5 inches, enough to swallow a couple of jackets, a sleeping bag, and a pillow without eating into seat or bed space.
This one is JT-specific. It's very close to the Wrangler JLU Attic, but the straps are sized differently — for a JLU, run the JLU version instead. Not recommended for soft-top convertibles, since the install relies on the hard roll-bar geometry overhead.
Construction is heavy-duty mesh, mil-spec webbing, and genuine mil-spec hardware, laced with adjustable paracord so you can re-tension it for whatever you're hauling and keep it from sagging into your head. The open mesh breathes, so wet rain gear and damp jackets dry out up top instead of soaking a gear bag. Built in Virginia and backed by Blue Ridge Overland Gear's lifetime guarantee.
Couldn't load pickup availability
Overview
The Jeep Gladiator Attic is a strap-mounted overhead mesh net for the Jeep Gladiator (JT), 2020 and newer. It turns the unused space above the rear seat into soft-goods storage and installs without drilling.
Key features
- 40 x 17.5 in heavy-duty mesh compartment for soft goods (jackets, rain gear, pillows, sleeping bags, blankets)
- Mounts by wrapping mil-spec straps around the Gladiator's roll bar — no drilling or permanent hardware
- Adjustable paracord lacing to re-tension the net and control sag under load
- Genuine mil-spec hardware and mil-spec webbing throughout
- Open mesh lets wet gear breathe and dry instead of trapping moisture
- Built in Virginia, USA; backed by a lifetime guarantee
Use cases
Best for keeping bulky soft goods off the seats and out of the bed on longer trips — jackets, bedding, and rain layers ride overhead and stay in easy reach from inside or outside the cab. The breathable mesh also makes it a handy spot to dry damp gear when weather rolls through camp.
- Fitment: Jeep Gladiator (JT), 2020 and newer (not JLU; not for soft-top convertibles)
- Mesh compartment: 40 x 17.5 in
- Material: Heavy-duty mesh + mil-spec webbing
- Hardware: Genuine mil-spec
- Lacing: Adjustable paracord
- Mounting: Straps wrap the factory roll bar — no drilling
- Holds: Soft goods only (jackets, rain gear, pillows, sleeping bags, blankets)
- Ship weight: ~454 g
- Built in: Virginia, USA
- Warranty: Lifetime guarantee
Will it fit my Jeep?
It's built specifically for the Jeep Gladiator (JT), 2020 and newer — the only Gladiator generation, so every model year from 2020 on is covered. It is not the same as the Wrangler JLU Attic; the straps are sized differently, so use the JLU version for a JLU. It's also not recommended for soft-top convertibles.
How does it mount — do I have to drill anything?
No drilling. The mil-spec straps wrap around the Gladiator's factory roll bar overhead and cinch tight, and an install guide ships with it. Plan a few minutes to get the strap tension dialed.
Will it sag once I load it up?
The paracord lacing is adjustable, so you re-tension the net for the load you're carrying to keep it from drooping into headroom. Keep it to soft goods and re-cinch after a heavy day.
What can I store in it, and how much weight will it hold?
It's made for soft goods — jackets, rain gear, pillows, sleeping bags, and blankets. Blue Ridge Overland Gear doesn't publish a rated weight limit, so skip hard or heavy items like tools and recovery gear; this is a bedding-and-layers net, not a cargo shelf.