Crosswing Talon Mount Kit
Crosswing Talon Mount Kit
The Talon Mount Kit is the modular bracket hardware that attaches a Kammok Crosswing car awning to your rig. It is built from components you can run on their own or stack with other kits, so the same parts cover most roof-rack and crossbar setups instead of locking you into one. The kit weighs about 6 lb and ships ready to bolt up.
You mount it two ways. With the included clamp plates, the Talon Mounts grip a wide range of stock and aftermarket crossbars. If your rack already has integrated T-slots, drop the clamp plates and fasten the mounts straight to the bars. Either path uses quick-attach brackets, so once the mounts are on the vehicle you set the Crosswing in place by yourself. At install you pick from three deployment angles to dial the awning height to your door clearance and campsite.
Vertical mounting, like clamping to a utility-truck bed rail, is supported but needs Kammok's separate Vertical Brackets in combination with these parts. Running the Crosswing across two vehicles is easy too: add a second pair of Talon Mounts to the other rig and move the awning over in minutes.
Couldn't load pickup availability
Overview
The Crosswing Talon Mount Kit is the modular bracket hardware that secures a Kammok Crosswing awning to crossbars or T-slot racks. It clamps to stock and aftermarket bars or mounts direct to integrated T-slots, with three selectable deployment angles.
Key features
- Modular bracket components — run them alone or combine with other Crosswing mount kits for your specific rack
- Clamp plates grip a wide range of stock and aftermarket crossbars; remove them to bolt direct to integrated T-slots
- Three deployment angles selected at install to set awning height
- Quick-attach brackets for a one-person mount-and-go once the hardware is on the vehicle
- Pairs with Kammok Vertical Brackets (sold separately) for vertical-surface mounting
Use cases
Most buyers run the clamp plates to put a Crosswing over an SUV or truck crossbar rack, or skip them to mount direct on a rack with integrated T-slots. A second pair of Talon Mounts is the clean way to share one awning across two vehicles — leave a set installed on each and move the awning between them.
- Fits: Kammok Crosswing car awning
- Mount interface: Crossbars (with clamp plates) or integrated T-slot racks (direct)
- Deployment angles: 3 selectable at install
- Install: Quick-attach brackets, one-person
- Vertical mounting: Requires Kammok Vertical Brackets (sold separately)
- Kit weight: ~6 lb (2.7 kg); ships at ~6.9 lb (3.1 kg) boxed
- SKU: AwningMount_StockMountKit
- UPC: 817838010824
Will this mount my Crosswing to factory roof rails or only aftermarket racks?
The clamp plates grip a wide range of both stock and aftermarket crossbars. If your rack has integrated T-slots, you can skip the clamp plates and bolt the Talon Mounts straight to the bars.
Do I need a separate kit for each vehicle, or can I share one awning?
Buy a second pair of Talon Mounts for the other rig and leave them installed. The quick-attach brackets let you move the same Crosswing awning between vehicles in minutes.
Can I set the awning height, or is it fixed?
At install you choose from three deployment angles, so you can set the Crosswing at the height that clears your door or matches your campsite.
Can I mount this to a vertical surface like a truck bed rail?
Top-of-crossbar and T-slot mounting work with this kit alone. Vertical surfaces need the Talon Mount components combined with Kammok's Vertical Brackets, which are sold separately.
Is it really a one-person install?
Once the mounts are fastened to your vehicle, the quick-attach brackets let you position and secure the awning by yourself. Mounting the hardware to the bars first is the part worth taking your time on; re-check the clamp-plate bolts after the first few trips as they settle.