The Kammok Crosswing Shade Panel is a side sun wall that hangs off the faceplate of your Crosswing Car Awning. The awning shades straight down. This panel walls off the low sun and sideways rain that the roof alone lets through, so you keep your shade when the sun drops in the afternoon. It runs on 210D polyester ripstop with a 1200mm PU coating, so it sheds both.
Setup is knotless. Aluminum toggles clip the top edge to the awning faceplate. The bottom edge stakes at three points, one in each corner and one in the middle, using integrated guy lines with line-lock adjusters. Drop those lines low to angle the wall toward the sun, or pull them tight on rough terrain. Three aluminum ground anchors come in the box, and the panel rolls into its own attached storage bag so it stays with the awning.
It is size-matched to the awning. The 5 Ft panel measures 55.5 by 78 inches and weighs 1.1 lb; it fits the 5 Ft Crosswing Car Awning only. The 7 Ft panel measures 83.25 by 78 inches and weighs 1.5 lb; it fits the 7 Ft awning only. Match the panel to your awning size when you order.
