50L Overland Gear Box Gray [CO]
50L Overland Gear Box Gray [CO]
The 50L Overland Gear Box is a 50-liter hard-sided storage box with a tough LDPE shell built to ride on the outside of your rig. It holds 19.25in x 9.25in x 12in of gear inside a 24.5in x 15in x 14in footprint, and the whole thing weighs about 17 lbs empty. A gasket seal around the lid keeps rain, splash, and trail dust out, so the straps, shackles, and dirty gear you'd never want loose in the cab stay clean and dry.
The lid runs on pre-installed gas struts that hold it open while you load, and the latches lock so you can run a small padlock through them. Molded handles on the sides make it a two-hand carry, and integrated tie-down points let you strap it to a bed rack, roof rack, or trailer deck. When the trip's over, pull the drain plug in the bottom and hose the whole box out.
The lid comes with rivnuts already set, so you can bolt on a MOLLE panel (sold separately) and lash extra gear up top. The boxes also stack, which means you can run a 50L and a larger box together and strap the stack down as one block. It comes in gray.
Couldn't load pickup availability
![50L Overland Gear Box Gray [CO]](http://www.xgridoutfitters.com/cdn/shop/files/23ZERO_Overland_Gear_Box_50L_15_SKU230OVGB50_jpg.jpg?v=1780066925&width=1445)
Overview
A 50-liter hard storage box with an LDPE shell, a waterproof and dustproof gasket seal, and a lid that locks and pops open on gas struts. Built to mount outside the vehicle and keep dirty or weather-sensitive gear contained.
Key features
- LDPE shell with a waterproof and dustproof gasket seal
- Pre-installed gas struts hold the lid open
- Lockable latches accept a small padlock
- Drain plug for hosing out mud, sand, and spills
- Integrated tie-down points and lid rivnuts for a MOLLE panel (sold separately)
Use cases
Most people run it as a recovery or tool box, keeping straps, shackles, gloves, and other grubby gear in one rinse-able place. It also works as a camp-kitchen or consumables box strapped to a bed rack or trailer, staying dust- and rain-free on washboard roads. Because it stacks, you can pair it with a larger box and lock the stack down together.
- Capacity: 50 liters
- Outside dimensions: 24.5in L x 15in W x 14in H
- Inside dimensions: 19.25in L x 9.25in W x 12in H
- Weight: 17 lbs (empty)
- Shell material: Low-density polyethylene (LDPE)
- Seal: Waterproof and dustproof gasket
- Latches: Lockable
- Lid: Pre-installed gas struts
- Handles: Molded side handles
- Drain: Bottom drain plug
- Mounting: Integrated tie-down points
- Lid hardware: Rivnuts pre-mounted for a MOLLE panel (sold separately)
- Stackable: Yes
- Color: Gray
How much fits inside, and what are the real internal dimensions?
It holds 50 liters. The inside space is 19.25in L x 9.25in W x 12in H, and the outside footprint is 24.5in L x 15in W x 14in H.
Is it actually waterproof, or just water-resistant?
It has a waterproof and dustproof gasket seal that keeps rain, splash, and trail dust out. There's no published submersion rating, so treat it as a rain-and-dust-sealed box rather than a dunk-it-in-a-creek dry box.
Will the lid stay open while I dig through it?
Yes. Pre-installed gas struts hold the lid up so it won't drop on your hands while you load or unload.
How do I mount it to my rig or trailer?
Use the integrated tie-down points to strap it to a bed rack, roof rack, or trailer deck with ratchet or cam straps. The box is stackable, so you can run two and strap the stack down as one unit.
What are the rivnuts in the lid for?
They let you bolt on a MOLLE panel (sold separately) so you can lash extra gear, straps, or tools to the top of the box.
Can I lock it and clean it out easily?
The latches are lockable, so a small padlock fits right through them. A drain plug in the bottom lets you hose out mud, sand, or spills and drain the water.