The Rollercam 1.25-Inch Cam Strap is a finished, ready-to-use tie-down with a sewn straight end. The webbing is a quarter-inch wider than the 1-inch strap, so it carries a higher working load — this is the one you grab when the job is heavier than light lashing. It ships ready to run: thread the loose end through the buckle and pull.
The strap is built around Rollercam's patented cam buckle. You set tension by hand, and the cam holds it — no ratchet to crank, no knot to tie. It re-tensions as you pull, holds without slipping under road vibration, and releases one-handed when you're done. That last part matters on a washboard road or a long highway pull, where a strap that creeps loose is a strap you have to stop and reset.
Pick from six finished lengths: 2, 3, 4, 9, 12, and 20 feet. Use it to lash overland gear, traction boards, and rack loads, or to lock down a utility trailer or heavy equipment. Note the 50-foot option is different — it's a bare webbing roll with no buckle, meant for cutting your own custom runs.
