Single Tire Digital Pressure Gauge
Single Tire Digital Pressure Gauge
***New Product Sale!!!***
Single Tire Digital Pressure Gauge for fast and accurate readings!
- Shows pressure in increments of .1 PSI within .5% accuracy
- Reads and holds pressure till bleeder valve is pressed
- Auto shut-off in 1 minute after pressure is released
- Mode selection for BAR, Kar, and Kgf/cm²
- Range 5-120 PSI
- Includes storage bag and 2xAAA batteries
Couldn't load pickup availability
Overview
A compact digital tire gauge that reads and bleeds in one motion. Built for airing down and quick pressure checks across trucks, UTVs, side-by-sides, and trailers — 5-120 PSI with 0.1 PSI resolution.
Key features
- Reads 5-120 PSI in 0.1 PSI increments at ±0.5% rated accuracy
- Holds the reading on a backlit screen until you press the bleeder valve
- Bleeds air in controlled steps so you hit a target pressure without re-checking
- Four unit modes: PSI, BAR, KPA, and KGF/CM²
- Auto shut-off one minute after pressure is released to save battery
- Standard Schrader chuck fits car, truck, UTV, side-by-side, and trailer valves
- Runs on 2x AAA batteries (included); ships with a storage bag
Use cases
Airing down to a set trail pressure and watching it land without guessing, then verifying after you air back up. Doubles as a quick-check gauge for a mixed fleet — grab one tool for the truck, the trailer, and the side-by-side.
- Pressure range: 5-120 PSI
- Resolution: 0.1 PSI increments
- Accuracy: ±0.5% (rated)
- Unit modes: PSI / BAR / KPA / KGF/CM²
- Reading hold: holds until bleeder valve is pressed
- Auto shut-off: 1 minute after pressure release
- Valve fitment: standard Schrader chuck
- Power: 2x AAA batteries (included)
- In the box: gauge, storage bag, 2x AAA batteries
- Warranty: 3-year (EZ FLATE)
Does this inflate tires, or only read pressure?
It reads and bleeds — it is not a powered inflator. Press the chuck on the valve to read, then press the bleeder button to let air out in steps. To air back up, pair it with a compressor.
How accurate is it?
Rated ±0.5% with 0.1 PSI resolution. That is well within what trail airing-down needs; you can dial a target sand or rock pressure and trust the number on the screen.
What pressure range does it cover?
5-120 PSI. That spans single-digit sand pressures up through light-truck and trailer pressures, so one gauge handles most setups.
Will it fit my valve stems?
It uses a standard Schrader chuck, the same valve found on cars, trucks, UTVs, side-by-sides, and trailers. No adapters needed for standard stems.
How is battery life, and what powers it?
It runs on 2x AAA batteries (included) and auto shuts off one minute after you release pressure to stretch them. For long trips, toss a spare pair in the storage bag, and pull the batteries if you are storing it for months.