Racksbrax XD Lockable Wall Mount
Racksbrax XD Lockable Wall Mount
The RacksBrax XD Lockable Wall Mount is a pair of quick-release locking bodies that bolt to your garage or shed wall and hold a roof-rack accessory when it is off the vehicle. Locks come pre-fitted. The set ships as two bodies plus keys, part number RBUS9011.
It runs on the same XD Hitch quick-release that lives on your roof rack. Lift the awning (or conduit tube) off the rack, drop it onto the wall bodies, and lock it down — under 10 seconds per move, and the same in reverse. That is the whole point: run the rig as a daily commuter through the week with a bare roof, then re-mount the awning for the weekend without wrestling a heavy unit overhead or leaving it bolted up year-round.
One hard limit to know up front: the wall mount only accepts the RacksBrax XD Hitch range. Your accessory has to already be on XD Hitches for the bodies to take it — this is not a universal storage bracket. If you already run XD Hitches on the vehicle, the supplier can key-match the wall-mount locks to your existing combination; arrange it at order time. Ship weight is about 2 lb (907 g) for the pair.
Couldn't load pickup availability
Overview
A pair of lockable, quick-release wall mounts that store a RacksBrax XD roof-rack accessory off the vehicle and keep it locked. Built for the RacksBrax XD Hitch range only.
Key features
- Ships as a pair of quick-release bodies with locks pre-fitted, plus keys (part RBUS9011)
- Accepts any accessory already running on the RacksBrax XD Hitch system — awnings, conduit tubes, and more
- Under 10 seconds to move an accessory from roof rack to wall, or wall back to roof
- Locks secure the accessory to the wall, not just rest it there
- Supplier can key-match the wall-mount locks to an existing XD Hitch combination at order time
Use cases
Most buyers use the pair to clear a heavy awning off the roof between trips so the rig runs quieter and burns less fuel during the week, then re-mount it for the weekend in seconds. The lock means the awning lives secured on the garage wall instead of sliding around a shed corner. It also frees the roof rack to carry a different XD accessory while the awning is parked.
- Part number: RBUS9011 (model 9011)
- Barcode (UPC): 9355802008510
- Pack contents: 2 quick-release lockable bodies + keys
- Locks: Pre-fitted; key-match to existing XD combination available at order time
- Compatibility: RacksBrax XD Hitch range only (not universal)
- Changeover time: Under 10 seconds per move
- Ship weight: 907 g (approx. 2 lb) for the pair
What comes in the pack?
One pair of quick-release XD bodies with the locks already fitted, plus keys. You mount the two bodies to your garage or shed wall; they then accept the accessory off your roof rack.
Will this work with my roof rack or awning?
Only if your accessory is mounted on the RacksBrax XD Hitch range. The bodies are made to take XD Hitches and nothing else — this is not a universal storage bracket. Confirm your awning or conduit tube is on XD Hitches before ordering.
How fast is the changeover?
Under 10 seconds each way. Lift the accessory off the roof, drop it onto the wall bodies, and lock it. Reverse the steps to put it back on the vehicle.
Can the locks match keys I already have?
If you already run XD Hitches, the supplier can key-match the wall-mount locks to your existing combination. This is arranged at order time, so add a note to your order requesting the match.
How should I maintain the locks?
The bodies live in a garage or shed, so the lock cylinders see dust and humidity over time. A periodic shot of dry lube in the cylinders keeps the keys turning freely — standard padlock care, nothing special.