Racksbrax HD Hitch Tradesman II [R]

Overview

The RacksBrax HD Hitch Tradesman II is a 2-point quick-release mounting kit for pull-out awnings and roof-rack accessories. It carries 40 kg total across two points and lets you mount or remove the load in under 10 seconds without tools once installed.

Key features

• Two mounting points, 40 kg total load (20 kg per point)
• Fits awnings and accessories with 40-52 mm spine track spacing
• Stainless steel M8 fasteners supplied; suit both M6 and M8 drill holes
• UV-stabilised glass-reinforced nylon hitch bodies, stainless hardware
• Includes HD Wall Mounts and HD Holders for garage-wall storage
• Includes 2 Prop Cleats for a freestanding pull-out awning pitch

Use cases

Mount a pull-out awning, shower tent, or conduit tube to a roof rack and pull it off in seconds when you want the rack clear. Between trips, hang the accessory on a garage wall using the included mounts to keep weight off the roof. The prop cleats let a pull-out awning stand on its own once pitched, so you can drive out from under it without dropping it.

• Mounting points: 2
• Hitches in kit: 2
• Max load: 40 kg total (20 kg per point)
• Spine track spacing: 40-52 mm
• Fasteners: stainless steel M8 supplied; suit M6 and M8 drill holes
• Hitch material: UV-stabilised glass-reinforced nylon
• Hardware material: stainless steel
• Release time: under 10 seconds, tool-free
• Class: HD (pull-out awnings, shower tents, some wing awnings)
• Included extras: HD Wall Mounts, HD Holders, 2 Prop Cleats
• Torque: M6 = 5 N·m, M8 = 6 N·m
• SKU: RBUS8162

How many awnings or accessories can this kit hold?

Two. The Tradesman II gives you two mounting points and a 40 kg total load limit (20 kg per point). If you need three points or up to 60 kg, the Tradesman III is the next step.

Will it fit my awning?

It fits pull-out awnings, shower tents, conduit tubes, and some wing awnings with 40-52 mm spine track spacing. Large 180, 270, or 360 wing awnings are a different class and need the XD Hitch instead.

Do I have to drill, and what fasteners are included?

Yes, you bolt the hitch halves to the rack and to the accessory bracket. The kit comes with stainless steel M8 fasteners that fit both M6 and M8 drill holes, so it works with most existing brackets.

How fast is the quick release once it is installed?

Under 10 seconds, with no tools. After the one-time install, the awning lifts on and off the two points by hand.

What torque should I use, and can I use a drill?

Torque the M6 bolts to 5 N·m and the M8 bolts to 6 N·m. Do not use a power drill to final-torque them; the hitch bodies are nylon and over-tightening can damage them.

How is this different from the plain HD Hitch Standard?

Same 2-point quick-release core. The Tradesman II adds HD Wall Mounts and HD Holders for garage-wall storage, plus 2 Prop Cleats for a freestanding pitch.