Kammok Python 10 Hammock Suspension Straps
Kammok Python 10 Hammock Suspension Straps
The Kammok Python 10 is a pair of 10-foot adjustable hammock suspension straps rated to hang up to 500 lb. Each strap carries 20 daisy-chain loops, so across the pair you get 20 connection points to dial in the exact hang you want — clip into a higher loop for a tighter pitch, a lower one to let the hammock lie flatter. The webbing is high-tenacity polyester chosen for minimal stretch, so the hang angle you set at dusk is the same one you wake up in.
Ten feet per side matters more than it sounds. Most strap pairs run short and force you to settle for whatever two trees sit close enough together. The extra length lets you skip a bad pair and reach a better, more level set of anchors across the site. Kammok's Nanoweave construction drops the extra stitching and bulk found in layered straps while keeping the full strength of the webbing.
The tree end uses a variable-width design that widens where it wraps the trunk, spreading the load across more bark instead of biting into a narrow line. That keeps the strap from slipping or sawing into the tree — better for Leave-No-Trace hangs and for the strap's grip. Both straps coil down into the included Sil/PU-coated stuff sack so they pack small and stay dry between hangs.
Couldn't load pickup availability
Overview
A pair of 10-foot polyester hammock suspension straps with 20 connection loops per strap and a 500 lb hang rating. Built with Kammok's Nanoweave construction for strength without bulk, and a variable-width tree end that protects bark.
Key features
- 10 ft per strap (20 ft combined) for reaching widely-spaced or awkward trees
- 20 daisy-chain loops per strap for fine hang-angle adjustment
- Rated to hang up to 500 lb
- High-tenacity, no-stretch polyester webbing holds the set hang angle overnight
- Nanoweave construction removes extra stitching and bulk while keeping strength
- Variable-width tree end spreads load to protect bark and resist slipping
- Includes a Sil/PU-coated coil stuff sack
Use cases
Use the Python 10 to open up anchor options at messy campsites — the extra length reaches trees short straps can't, so you can pick a flatter, more level pair. The wide tree end and bark-friendly contact make it a solid pick for Leave-No-Trace hangs in established and dispersed sites alike.
- Strap length: 10 ft each (20 ft combined pair)
- Connection points: 20 daisy-chain loops per strap
- Weight rating: Hang safely up to 500 lb
- Webbing: High-tenacity, no-stretch polyester; Nanoweave construction
- Tree protection: Variable-width design spreads load across bark
- Included: Pair of straps + Sil/PU-coated coil stuff sack
- Ship weight: 224 g
Will these work with any hammock or only Kammok hammocks?
They use standard daisy-chain loops, so they pair with any hammock that hangs from a carabiner or loop — not just Kammok models.
How much weight can the Python 10 hold?
Each hang is rated to hold up to 500 lb, which covers rider plus gear for the vast majority of setups.
Will the straps stretch and let the hammock sag overnight?
The webbing is high-tenacity polyester chosen for minimal stretch. Set your hang angle once and it holds through the night instead of creeping lower.
Why is the strap wider at the tree end?
The variable-width design widens where it wraps the trunk so the load spreads across more bark. That protects the tree and keeps the strap from slipping or rubbing.