Modular Manifold for Mounts
Modular Manifold for Mounts
Build Your System. Your Way.
Engineered in-house by EZ FLATE and proudly made for the off-road community, the Modular Manifold lets you create a customized, permanent air setup that fits your Lock & Load Mount and your rig’s layout perfectly. Built for flexibility and clean installs, this modular design gives you complete control over your hose system configuration — horizontal, vertical, or anywhere in between.
Key Features
-
Fully Modular Design: Multiple mounting holes let you configure the manifold in countless ways to fit your build.
-
Custom Fit: Mount it horizontally or vertically — it’s engineered to work seamlessly with your Lock & Load Mount for a sleek, integrated look.
-
Complete Kit Included: Each kit comes ready to install with:
-
1 slide valve
-
2 push-to-connect universal couplers for your hose system
-
1 digital pressure gauge
-
1 male I/M fitting
-
3 hole plugs and teflon tape to seal unused ports
- Mounting hardware to install the manifold to a Lock & Load Mount
-
-
Engineered for Clean Installs: Design a permanent yet serviceable air system that keeps your compressor setup tidy and trail-ready.
Pairs Perfectly With
Lock & Load Mount — for a secure, mounted compressor setup
Hardwire Wiring Harness — for a clean and powered install
Trail-Tested and Family-Built
Like every EZ FLATE product, the Modular Manifold was designed by real off-roaders who live the lifestyle. Whether you’re building a simple garage setup or a fully integrated overland rig, this manifold gives you the power, protection, and precision you need — with the EZ FLATE quality you trust.
Couldn't load pickup availability
Overview
The EZ FLATE Modular Manifold is a compressor air-distribution block that bolts to the EZ FLATE Lock & Load Mount and splits one feed into two push-to-connect outlets. It turns a mounted dual-cylinder compressor into a clean, fixed air station for tires and tools.
Key features
- Two push-to-connect universal couplers off one feed — run a tire hose and an air-tool line at the same time.
- Mounts horizontal, vertical, or angled via multiple bolt-hole positions on the Lock & Load Mount.
- Ships complete: slide valve, digital pressure gauge, male I/M fitting, 3 hole plugs, teflon tape, and Lock & Load mounting hardware.
- Permanent-but-serviceable: plug unused ports now, open them later as the air system grows.
- Compatible with EZ FLATE M.O.A.B. compressors and most dual-cylinder units on a similar base plate (Thor's Lightning Bolt, MAXI TRAC).
Use cases
Most buyers run it as the fixed air block for an on-board compressor — one slide valve and gauge at the source, two couplers feeding a tire hose and an air tool. Because the ports cap off cleanly, it also suits a staged build: start with one outlet for airing up tires, then add a bumper quick-connect or a second line down the road without re-plumbing.
- Type: Compressor air-distribution manifold (mounting block)
- Mounts to: EZ FLATE Lock & Load Mount (horizontal, vertical, or angled)
- Outlets: 2 push-to-connect universal couplers
- In the box: 1 slide valve, 2 push-to-connect couplers, 1 digital pressure gauge, 1 male I/M fitting, 3 hole plugs, teflon tape, Lock & Load mounting hardware
- Compressor compatibility: EZ FLATE M.O.A.B. / M.O.A.B. Auto Air; most dual-cylinder compressors on a similar base plate (Thor's Lightning Bolt, MAXI TRAC)
- Install type: Permanent yet serviceable
- Warranty: 3-year limited (mechanical defects, normal use)
What comes in the kit?
One slide valve, two push-to-connect universal couplers, one digital pressure gauge, one male I/M fitting, three hole plugs with teflon tape, and the hardware to bolt the manifold to a Lock & Load Mount.
Do I need the Lock & Load Mount to use it?
Yes. The included hardware is cut for the EZ FLATE Lock & Load Mount, and the manifold is designed to fasten to it. If you don't already run the mount, plan to add it.
Is this a compressor or an air source on its own?
No. It's a distribution and mounting block. You supply the compressor; the manifold splits its output into two usable outlets with a gauge and slide valve at the source.
Which compressors does it fit?
It's built around EZ FLATE's M.O.A.B. and M.O.A.B. Auto Air compressors and works with most dual-cylinder compressors that share a similar base plate, including the Thor's Lightning Bolt and MAXI TRAC.
Can I mount it vertically?
Yes. Multiple bolt-hole positions let you run it horizontal, vertical, or angled to fit the space in your rig.
What do I do with the ports I'm not using?
Cap them with the three included hole plugs and wrap the threads with the supplied teflon tape so they seal. Open a port later when you add a second line or a quick-connect. Wrapping the plugs is the step most leaks trace back to, so don't skip it.