MAXTRAX MKII Titanium Grey
MAXTRAX MKII Titanium Grey
The original MAXTRAX recovery tracks! Titanium Grey is the perfect companion for those with silver or light-coloured vehicles.
- The aggressive large cleats on MAXTRAX sink their teeth into the tyre tread and the terrain under your 4WD vehicle to prevent it from slipping back into mud, snow, or sand and make vehicle recovery quick and easy.
- MAXTRAX stows easily with the rest of your car camping, overlanding, or four-wheel drive touring gear.
- Multiple mounting options available to suit your vehicle and your use case.
- The SAFE, SIMPLE, QUICK and EASY vehicle recovery device.
- MAXTRAX is easy to carry and thanks to its signature double-edged design. Quck and easy to manoeuvre under your tires.
- MAXTRAX have six comfortable built-in handles and a shovel at either end for removing excess earth to help get you unstuck quicker
Couldn't load pickup availability
Overview
The MAXTRAX MkII is a pair of recovery boards built for self-rescue when a tire loses grip in sand, mud, or snow. They work as both traction ramps and shovels, with no moving parts to fail.
Key features
- UV-stable engineering-grade reinforced nylon, injection-molded in Australia — flexes under load and springs back.
- 45 in × 13 in × 3.5 in per board, about 7.5 lb each (~15 lb the pair).
- Aggressive cleats grip tire tread on top and bite terrain underneath.
- Six built-in handles for carrying and placement, plus a shovel edge on each end to clear debris.
- Rated to ~10,000 lb per pair; stacks to ~3.4 in thick for storage.
Use cases
Carry a pair for sand, mud, and deep-snow self-recovery. Beyond pulling a stuck rig out, the boards double as a temporary trail surface — lay them over a soft or washed-out section to keep from bogging down in the first place.
- Quantity: Pair (2 boards)
- Length (per board): 45 in (1150 mm)
- Width (per board): 13 in (330 mm)
- Height (per board): 3.5 in (85 mm)
- Weight (per board): ~7.5 lb (3.4 kg)
- Weight (pair): ~15 lb (6.8 kg)
- Stacked thickness (pair): ~3.4 in
- Material: UV-stable engineering-grade reinforced nylon
- Origin: Made in Australia
- Vehicle rating: up to ~10,000 lb (4,500 kg) per pair
- Color: Titanium Grey
- SKU: MTX02TG
How much vehicle weight can a pair hold?
A pair is rated for standard 4x4s around 10,000 lb (4,500 kg). They've been used on heavier expedition rigs, but for deep sand or towing you'll want two pairs.
Can I just spin the tires to power out?
No. Wheelspin burns the cleats off the top of the board and voids the warranty. Ease onto them with steady throttle and let the cleats do the work.
Do I need one pair or two?
One pair handles most recoveries. Carry two pairs (four boards) for deep sand crossings, remote desert travel, or when you're towing a trailer or boat.
How do I mount and store them?
A pair stacks to about 3.4 inches thick. Store them in a carry bag, on a rear wheel harness, or on a roof rack with mounting pins. Keep them where you can reach them fast, not buried under your gear.
Will they hold up in the sun?
Yes. The nylon is UV-stabilized to resist sun degradation, and the boards carry a lifetime warranty against material faults. Rinse grit off after sandy recoveries.
How do I actually use them?
Clear snow or mud from the front of each drive tire with the shovel edges, wedge the leading edge of a board under the tire, then ease forward onto it. The cleats grip the tread and pull you out.