Lock 'N Load Universal Compressor Mount
Lock 'N Load Universal Compressor Mount
The EZ FLATE Lock 'N Load Universal Compressor Mount is a steel bracket that bolts a portable dual-cylinder compressor to your rig and still lets you pull it off in seconds. The footprint runs about 15 x 7 in with a 4 in profile, and the kit ships in raw steel, stainless steel, or black powder coat so you can match the finish to where it lives.
The latch system is the point. Bolt the base down once, drop the compressor in, and the quick-release latches hold it steady over washboard and rock. When you want it portable again, the latches pop and the unit lifts out clean. It's built around the EZ FLATE M.O.A.B. and M.O.A.B. Auto Air base plate and fits most dual-cylinder compressors with a similar footprint.
Mount it in the bed, the cab, a toolbox, or a drawer system. It's a universal bracket, so plan on some test fitting for clearance, and check your compressor's base bolt pattern before you commit. The kit includes the compressor mounting hardware, stabilizing feet, the latches and latch hardware, and a link to a step-by-step install video. Wiring harness and modular manifold are sold separately. Engineered and made in the USA.
Couldn't load pickup availability
Overview
A patent-pending steel mounting bracket that locks a portable compressor down for travel and releases it in seconds. Built around the EZ FLATE M.O.A.B. base plate and most dual-cylinder compressors with a similar footprint.
Key features
- Quick-release latch system holds the compressor over rough terrain, releases by hand with no tools
- About 15 x 7 in mounting footprint, 4 in tall — fits beds, cabs, toolboxes, and drawer systems
- Three finishes: raw steel ($129.99), stainless steel ($159.99), black powder coat ($199.99)
- Kit includes mounting hardware, stabilizing feet, latches and latch hardware, plus a step-by-step install video
- Engineered in-house and made in the USA; wiring harness and modular manifold available separately
Use cases
Give a compressor a permanent home in a truck bed or drawer system without giving up portability — latch it for the drive, lift it out to share with another rig at a trail meetup, then drop it back in. The flat profile keeps it out of the way until you need air.
- Mounting footprint: ~15 x 7 in
- Height profile: ~4 in
- Finishes: Raw steel / Stainless steel / Black powder coat
- Material: Steel
- Mounting system: Quick-release latch (tool-free removal)
- Compatibility: EZ FLATE M.O.A.B., M.O.A.B. Auto Air, and most dual-cylinder compressors with a similar base plate
- Included: Compressor mounting hardware, stabilizing feet, latches and latch hardware, install video
- Sold separately: Wiring harness, modular manifold
- Origin: Made in the USA
- Shipping weight: ~8 lb (3629 g)
Will this fit my compressor?
It's built around the EZ FLATE M.O.A.B. and M.O.A.B. Auto Air base plate and fits most dual-cylinder compressors with a similar base footprint. Check your compressor's base bolt pattern against a dual-cylinder layout before you mount it.
Can I take the compressor off after it's mounted?
Yes. The quick-release latches lock the unit down for travel and release by hand in seconds, so you can pull the compressor to carry it to another rig or store it between trips.
Where can I mount it?
Truck bed, cab, toolbox, drawer system, or cargo area — anywhere with a flat surface and clearance for the roughly 15 x 7 in footprint. It's a universal bracket, so expect some test fitting to find the right spot.
What's in the box?
Compressor mounting hardware, stabilizing feet, the latches and latch-mounting hardware, and a link to a step-by-step install video. The wiring harness and modular manifold are separate add-ons.
Which finish should I pick?
Raw steel is the budget option but will surface-rust if it stays wet. Choose stainless steel or black powder coat for exposed or wet mounting spots where corrosion is a concern.
Is there a warranty?
EZ FLATE backs its hardware with a 3-year warranty. Hold on to your order details in case you need to file a claim.