L Track Surface Mount (2-Pack)
L Track Surface Mount (2-Pack)
Designed for heavy-duty performance, our surface mount is built to secure your gear with confidence, whether on the road or at the job site. Each pack includes two 4-foot aluminum tracks, providing the strength and versatility you need for any setup.
Includes
-
Two 4’ or 8' Aluminum 6061-T6 Tracks (48 inches/96 inches)
-
Pre-drilled mounting holes every 6 inches
-
Smooth, rounded track edges
Key Features
-
High-Strength Aluminum: Crafted from lightweight yet tough aluminum, these tracks are built to withstand demanding environments without adding unnecessary weight.
-
Length: The extended length offers flexibility for larger setups, giving you more options for securing gear, tools, or equipment. Tracks may also be cut to fit your exact setup.
-
Versatile Application: Ideal for truck beds, trailers, and utility vehicles, the L Track works seamlessly with Rollercam L Track accessories for a reliable, secure hold.
-
Easy Installation: Pre-drilled holes ensure a simple installation process, so you can quickly set up your tie-down system exactly where you need it.
Mounting Hardware
The pre-drilled holes are spaced every 6 inches and accept the following hardware (not included):
-
Screw: 1/4"-20 or 5/16"-18 stainless steel, 90° countersunk (flat head), 1-1/2" long
-
Hardware: Pair each screw with a matching washer and nut
Choose a fastener size that suits your mounting surface and load requirements.
Pair these L Tracks with Rollercam’s L-Track Tie Down Set to create a durable, customized tie-down system ready for any challenge, whether on an off-road adventure or a demanding job site.
Disclaimer: Due to the variety of factors involved in installing L Track—like the fasteners you use and the surface you mount to—we can’t guarantee a specific working load limit.
Couldn't load pickup availability
Overview
A 2-pack of 48 in (4 ft) 6061-T6 aluminum L-track that bolts to a flat surface and turns it into clip-in anchor points for Rollercam tie-down fittings. Mounting hardware and strap fittings are sold separately.
Key features
- Two 48 in (4 ft) tracks per pack, 6061-T6 aluminum
- Pre-drilled mounting holes every 4 in (about 12 anchor points per track)
- Smooth, rounded edges to keep gear and hands off sharp metal
- Accepts standard 1 in Rollercam L-track fittings (cam and straight end)
- Surface mount: sits on top of the surface and bolts down, no cutout needed
- Also available in an 8 ft length
Use cases
Built to add fixed tie-down points wherever you need them: truck beds, trailer floors, utility-vehicle decks, even a shop or garage wall. Bolt the tracks where the gear lives, then clip Rollercam cam straps in to lock down coolers, fuel cans, and recovery gear, and re-tension as the load settles on the trail.
- Quantity: 2 tracks per pack
- Track length: 48 in (4 ft) each
- Material: 6061-T6 aluminum
- Mounting holes: pre-drilled every 4 in
- Edges: smooth, rounded
- Mount type: surface mount (bolts on top, no cutout)
- Fitting compatibility: standard 1 in Rollercam L-track ends (cam and straight)
- Recommended fasteners (sold separately): 1/4-20 or 5/16-18 stainless, 90-degree countersunk flat-head, 1-1/2 in long, with washer and nut
- Working load limit: not published (depends on fasteners and mount surface)
- Shipping weight (4 ft pack): 1134 g (about 2.5 lb)
- Other size: 8 ft length available (2268 g)
Are the mounting bolts included?
No. Bolts are sold separately. Rollercam specs 1/4-20 or 5/16-18 stainless, 90-degree countersunk flat-head, 1-1/2 in long, each with a washer and nut on the back of the surface.
What is the working load limit of the track?
Rollercam doesn't publish one number, because the real limit depends on the fasteners you use and the surface you bolt to. The track itself is 6061-T6 aluminum. Pick hardware and a backing surface rated for the load you plan to carry.
Will Rollercam straps and fittings clip into this track?
Yes. Standard 1 in Rollercam L-track ends drop into the slot, both the cam fitting and the straight end. That cam fitting is what lets you re-tension after loading and release with one hand.
What is the difference between surface mount and recessed L-track?
This is surface mount: it sits on top of the bed, floor, or wall and bolts down, no cutout required. Recessed (flush) track drops into a cut opening so it sits level with the surface. Surface mount installs faster and needs no cutting.
How do I install it in a truck bed?
Set the track where you want it, mark the pre-drilled holes, drill through, then bolt it down with a washer and nut behind each hole. You need access to the back of the mounting surface to fit the nuts. Holes are every 4 in, so you get plenty of anchor points along the 48 in rail.
How do I keep the track working over time?
The 6061-T6 aluminum and stainless hardware hold up outdoors. Rinse grit out of the slot now and then so fittings keep seating and sliding cleanly.