ICECO VL60ProS / APL55 Steel Fridge Mounting Slide
ICECO VL60ProS / APL55 Steel Fridge Mounting Slide
The ICECO VL60ProS / APL55 mounting slide is a heavy-duty steel fridge slide rated to 220 lb (100 kg). It bolts your portable fridge to a flat platform so it can ride locked down, then pull out toward you when it's time to eat. Closed, it measures 28.9 x 21.5 x 2.62 in. It opens to 56.63 in — about 28 in of travel — so the lid clears the tailgate or drawer face without you climbing over a wheel well.
The slide locks at three detents: closed, half, and fully out. Closed keeps the fridge pinned for the trail. Half lets you crack the lid on a grade without it rolling back. Full gives you the whole top for restocking. The rails run on a steel frame built to take washboard and corrugations, and four tie-down straps are included to strap the fridge to the carriage.
This slide fits the ICECO APL55 and VL60ProS only. It does not fit the VL60D, which uses a different base. Floor-mount bolts are not in the box — you supply hardware sized to your truck bed, drawer top, or DIY base plate. Plan on thread-locker at install so the fasteners stay put over miles of rough road.
Couldn't load pickup availability
Overview
Heavy-duty steel slide mount for the ICECO APL55 and VL60ProS portable fridges. Rated to 220 lb, it locks the fridge down for travel and pulls out to 56.63 in for full-lid access.
Key features
- Heavy-duty steel frame and rails, rated to 220 lb (100 kg)
- 3-position lock: closed, half-out, and full pull-out
- Closed footprint 28.9 x 21.5 x 2.62 in; extends to 56.63 in
- Four tie-down straps included to secure the fridge to the carriage
- Fits ICECO APL55 and VL60ProS (not VL60D)
Use cases
Most buyers bolt it to a truck-bed floor or drawer system so the fridge rides locked and pulls toward the tailgate at camp. It also works on a DIY base plate in an SUV cargo area — anywhere you have a flat platform and the hardware to anchor it.
- Compatibility: ICECO APL55, VL60ProS (not VL60D)
- Material: Heavy-duty steel frame and slide rails
- Max holding weight: 220 lb (100 kg)
- Closed dimensions (L x W x H): 28.9 x 21.5 x 2.62 in
- Fully open length: 56.63 in (about 28 in of travel)
- Lock positions: 3 (closed, half, full)
- Included: 4 tie-down straps
- Floor hardware: buyer-supplied
- Shipping weight: about 24.2 lb
Which fridges does this slide fit?
The ICECO APL55 and VL60ProS. It does not fit the VL60D — that model uses a different base and needs its own slide.
How much weight can it hold?
It's rated to 220 lb (100 kg). A fully loaded APL55 or VL60ProS plus food and ice sits well under that. The rating is for the fridge, not for stacking extra gear on top.
Does it lock when pulled out, or just slide free?
It locks at three positions: closed, half-out, and fully extended. The closed detent pins the fridge for travel; the half and full detents hold it in place while you're getting into it.
Does it come with mounting hardware?
It ships with four tie-down straps to secure the fridge to the carriage. The bolts that anchor the slide to your truck bed, drawer, or base plate are not included — you supply hardware sized to your platform.
Will the fasteners stay tight on rough roads?
Some users have reported screws backing out over time on washboard and corrugations. Run a dab of thread-locker on the hardware at install and re-check it after your first long trip. That keeps the detents and frame tight.
How far does it extend?
Closed, it's 28.9 in front to back. Fully open it reaches 56.63 in — roughly 28 in of pull, enough to clear most tailgates and drawer faces so you can open the lid all the way.