Flipside Heated Bed Cover Double
Flipside Heated Bed Cover Double
*12V BATTERY REQUIRED. NOT INCLUDED
Shared Warmth For Twice the Adventure
Cuddle together with the Flipside Double. Outdoor comfort for two with this innovative dual-cover system, two connected heated bed covers allow you and your partner to enjoy customized warmth simultaneously. Perfect for couples in rooftop tents, and Camper/RV beds, the Double Flipside ensures everyone enjoys a warm night's sleep.
FITS 2 PEOPLE
KEY FEATURES:
- DUAL COMFORT SYSTEM: Two connected heated covers with individual controls for personalized comfort
- POWERFUL WARMTH: 96W max heat output per side delivers exceptional warmth even in freezing conditions
- DUAL SMART CONTROLLERS: Two intuitive interfaces remember your preferred settings with built-in safety sensors
- ECO-CONSCIOUS DESIGN: 100% post-consumer recycled polyester micro-suede
- ADVENTURE-READY: Includes 12V vehicle adapter for easy power from your vehicle or portable battery
- DURABLE CONSTRUCTION: Water-resistant outer shell designed for outdoor use
- PORTABLE COMFORT: Easily packs down for transport and storage
- 6FT - 12V Vehicle Adapter Included + Splitter Included
*Not Compatible with Anker Solix C1000*
Couldn't load pickup availability
Overview
Two-person 12V heated bed cover with independent per-side controls. 48W per side / 96W max total. Designed for rooftop tents and truck campers running a 12V house battery.
Key features
- Dual independent controllers — each side sets its own heat level; one side can run while the other is off
- 48W per side / 96W total max draw — smart controller remembers last setting; auto-shuts off on safety trigger
- 100% recycled polyester shell + micro-suede base — base grips foam mattress without sliding
- 12V vehicle adapter included — works with any 12V system; minimum 500Wh / 4A battery recommended
- Not compatible with Anker Solix C1000 — confirm your battery's 12V port specs before ordering
Use cases
The Double is the two-person version of the Flipside, built for couples or pairs sharing a rooftop tent, truck camper, or overlanding sleeping platform. Each person controls their own side, which eliminates the "one of us is always cold" problem common to shared sleeping systems. Pairs with a standard 12V house battery or portable power station (500Wh or larger, 4A output minimum). Can be combined with the Ignik Topside Heated Blanket on top for full 360-degree heated sleep in sub-freezing conditions.
- Power: 12V DC
- Max draw: 48W per side / 96W total (both sides full)
- Controller: Smart controller, remembers last setting, safety auto-shutoff
- Shell: 100% post-consumer recycled polyester
- Base: Micro-suede (non-slip on foam mattress)
- 12V adapter: Included (vehicle adapter)
- Battery minimum: 500Wh / 4A output
- Incompatible with: Anker Solix C1000
- Variants: 1 (Tan)
- SKU: IGRCS-00525TN
- Weight: 1,588g (3.5 lb)
- Battery/power source: Not included
How is the Double different from the standard Flipside?
The standard Flipside is a single-person heated bed cover — one controller, one heated zone. The Double places two independent heated covers side by side with separate controllers for each sleeper. Both sides can run simultaneously or independently; there is no shared control between the two halves.
How much power does the Flipside Double use?
Each side draws up to 48W at max heat. Both sides running simultaneously pull up to 96W total. Ignik recommends a minimum 500Wh battery with at least 4A continuous output on the 12V port. On a typical 500Wh station, both sides running on medium will last 6–8 hours.
Does it work with my Anker Solix C1000?
No. The Flipside Double is not compatible with the Anker Solix C1000 due to that unit's 12V output limitations. Use a battery or power station that provides a standard 12V port rated for at least 4A continuous draw.
Does the 12V adapter come in the box?
Yes. The kit includes a 12V vehicle adapter and a splitter to power both sides from a single 12V port. A 12V battery or power station is not included.
Can one side run while the other is off?
Yes. Each side has its own controller and operates independently. One side can run at full heat while the other is completely off. The controllers do not communicate with each other.
Is the battery included?
No. The Flipside Double requires an external 12V battery or power station (sold separately). Minimum 500Wh / 4A output is recommended for overnight use of both sides.
What happens if I only want to heat one side?
Turn off the controller for the side you don't need. Each side is independently controlled and draws power only when running. The other side stays off and draws no current.