Crosswing Tie-Down Kit
Crosswing Tie-Down Kit
The Crosswing Tie-Down Kit is the wind hardware for the Kammok Crosswing awning. It ships with two knotless guy lines, two aluminum screw stakes, and two fillable sandbags. The Crosswing on its own holds steady in winds up to 25 mph; the kit extends that, adding security for gusts to 35 mph when the awning is run at full extension.
The whole thing is knotless. Aluminum toggles and knotless hooks make the connection, and the guy lines adjust for length and tension without a single tied knot — set the angle, pull the line tight, clip the hook. On dirt, drive the screw stakes. On pavement or hardpack where stakes won't bite, fill the sandbags or wrap a guy line around a hard point — a loaded cooler, a vehicle wheel — and clip in. Same kit, any surface.
Packed, every component folds into one of the two sandbags, so the kit lives with the awning instead of getting lost in a gear tote. It's cheap insurance for the day the wind picks up, not a setup you run every night.
Couldn't load pickup availability
Overview
The Crosswing Tie-Down Kit adds wind security to the Kammok Crosswing awning, taking it from a 25 mph base rating to gusts of 35 mph at full extension. It's a knotless, surface-agnostic anchor system that works on dirt, pavement, and hardpack alike.
Key features
- Two knotless guy lines — adjustable length and tension, no knots to tie or untie
- Two aluminum screw stakes — thread into firm ground for a positive hold
- Two fillable sandbags — anchor on pavement and hard surfaces where stakes won't bite; double as the kit's storage pouch
- Knotless hooks and aluminum toggles — clip-and-go connections at the awning and the anchor end
- 35 mph gust security — added margin over the Crosswing's 25 mph base wind rating
Use cases
Run the guy lines and stakes when you deploy the awning at full length and the wind kicks up past 25 mph. On pavement or rock, swap to the sandbags or a hard-point wrap. Most trips you won't need it — pack it anyway, because the day you do, nothing else in the kit replaces it.
- Fits: Kammok Crosswing vehicle awning
- Kit contents: 2 knotless guy lines, 2 aluminum screw stakes, 2 fillable sandbags, knotless hooks, aluminum toggles
- Wind security: gusts up to 35 mph (Crosswing base rating is 25 mph)
- Connection: knotless — hooks and aluminum toggles, no tied knots
- Surfaces: dirt (stakes), pavement / hardpack (sandbags or hard-point wrap)
- Packed storage: folds into one of the included sandbags
- Ship weight: 326 g
- SKU: CrossWing_WINDKIT
What exactly comes in the kit?
Two knotless guy lines, two aluminum screw stakes, and two fillable sandbags, plus the knotless hooks and aluminum toggles that make the connections. When you break camp, everything folds into one of the two sandbags.
How much wind can it handle?
The Crosswing awning on its own is rated to 25 mph. With the tie-down kit guying out the front corners, it gains security for gusts up to 35 mph. Treat 35 mph as the line to stow, not a number to push — in sustained higher wind, retract the awning. Its fast closure makes that quick.
Can I anchor it on pavement where I can't drive a stake?
Yes. Fill the sandbags and set them on the lines, or wrap a guy line around a hard point — a loaded cooler or a vehicle wheel — and clip the knotless hook. No ground penetration needed.
Do I have to tie knots?
No. The hooks and aluminum toggles handle every connection, and the guy lines adjust for length and tension on their own. Set it, tension it, clip it — done.
Will I actually use this on every trip?
Probably not. One long-term reviewer needed to guy the awning out just once across a full year of use. The kit is insurance for the windy day, not a nightly chore — which is exactly why it's worth keeping packed with the awning. </content>