ARB Element 63-Quart Fridge Tie-Down Kit (10900038)
ARB Element 63-Quart Fridge Tie-Down Kit (10900038)
The ARB Element 63-Quart Fridge Tie-Down Kit is the model-matched way to lock an ARB Element 63 qt weatherproof fridge freezer to your build. It's not a generic strap kit. The upper mounts are replacement Element handle fasteners that swap onto the fridge's own handle bolt points, so the stainless strap brackets sit flush and the fridge can't walk, tip, or fight the strap on washboard.
The kit runs powder-coated steel clamps with plastic-coated ends and webbing straps with spring-loaded clips. Lower powder-coated steel adaptor brackets bolt straight to the provisions on the ARB Element Fridge Slide, or to any flat hard surface if you're running a custom platform. A power-cable retention buckle captures the fridge cord so it stays clear of moving parts and the slide rails.
You can set it up semi-permanent or run it as a quick-release. Stainless mounting hardware ships in the box, and the upper brackets are stamped as bottle openers so the one tool you always need is right at the fridge. ARB backs it with a 3-year warranty.
Couldn't load pickup availability
Overview
A model-specific securing kit for the ARB Element 63 qt weatherproof fridge freezer. It uses replacement Element handle fasteners up top and powder-coated adaptor brackets down low to hold the fridge tight to the ARB Element Fridge Slide or any flat hard surface.
Key features
- Replacement Element-specific handle fasteners accept the stainless strap brackets — no modification needed on the 63 qt fridge
- Black powder-coated steel clamps with plastic-coated ends and webbing straps with spring-loaded clips
- Lower powder-coated steel adaptor brackets bolt to the ARB Element Fridge Slide or any flat hard surface
- Power-cable retention buckle keeps the fridge cord clear of moving parts
- Stainless steel mounting hardware included; upper brackets stamped as bottle openers
- 3-year ARB warranty
Use cases
Most owners run it to strap the Element 63 qt fridge to an ARB Element Fridge Slide inside a drawer or cargo platform build. If you've got a custom deck instead of the slide, the lower adaptor brackets bolt to any flat hard surface, so the same kit works whether or not you run ARB's slide.
- Fits: ARB Element 63 qt weatherproof fridge freezer
- Mounts to: ARB Element Fridge Slide or any flat hard surface
- Upper hardware: Replacement Element handle fasteners + stainless strap brackets (bottle-opener stamped)
- Lower hardware: Powder-coated steel adaptor brackets
- Straps: Webbing with spring-loaded clips
- Clamps: Black powder-coated steel with plastic-coated ends
- Cable management: Power-cable retention buckle
- Mounting hardware: Stainless steel, included
- Shipping weight: 907 g (2.0 lb)
- Warranty: 3 years
Does this fit my ARB Element 63-quart fridge?
Yes. This kit is cut for the ARB Element 63 qt weatherproof fridge freezer. The replacement handle fasteners swap onto the Element's existing handle bolt points, so the stainless brackets line up without any modification.
Do I need the ARB Element Fridge Slide to use it?
No. The lower brackets mount to the Element Fridge Slide's provisions, but they bolt to any flat hard surface just as well — a drawer top, deck, or custom platform. You can run it with or without the slide.
What comes in the kit?
Upper stainless strap brackets (bottle-opener stamped), replacement Element handle fasteners, webbing straps with spring-loaded clips, lower powder-coated steel adaptor brackets, stainless mounting hardware, and a power-cable retention buckle.
Will it hold the fridge on rough trails?
That's the job. The straps run from the upper brackets down to fixed lower brackets and clip taut, so the fridge can't slide or tip on washboard or off-camber sections. Plan to re-tension the webbing after the first few trips as it seats. Set it up semi-permanent or as a quick-release.