weBoost Overland Antenna
weBoost Overland Antenna
The weBoost Overland Antenna is the exterior cellular antenna for the weBoost Drive Reach Overland booster system. It's a high-gain omnidirectional antenna tuned across the 698-2700 MHz range (the 700, 800, 1700, 1900, and 2200 MHz cellular bands), pulling a weak tower signal off the horizon in every direction so the booster has something to amplify. Gain is 4 dB into a 50-ohm SMA-Male connector, and the low-loss coax is in the box.
This is the trail-rated half of the kit, not the road version. The mast adjusts the antenna from 7.5 to 20.5 inches on the included 13-inch extension, so you can raise the radome above a roof rack, basket, or tent and keep a clean view of the sky. An 18-inch extension is available if you need even more height. The whole thing is sealed to IP66 against dust and water, built to MIL-STD 810H for shock and vibration, and rides on a spring base that flexes when it takes a low branch or a hard gust instead of snapping off.
One thing to know before you buy: mounting hardware is not included. The antenna ships with the spring base, adjustable mast, and coax, but you mount it with the separate weBoost Overland mount (901168) or buy the 311249 kit that bundles the bracket. It needs a Drive Reach amplifier to do its job; on its own it's an antenna, not a signal booster.
No se pudo cargar la disponibilidad de retiro
Overview
The weBoost Overland Antenna (part 311248) is the off-road exterior antenna for the weBoost Drive Reach Overland cellular booster. It's a high-gain omnidirectional design with an adjustable mast and a spring base built to take trail abuse.
Key features
- High-gain omnidirectional antenna covering the 698-2700 MHz range
(700/800/1700/1900/2200 MHz cellular bands), 4 dB gain, 50-ohm, SMA-Male
- 13-inch adjustable mast positions the antenna from 7.5 to 20.5 inches;
optional 18-inch extension for extra height
- IP66 sealing against dust and water; MIL-STD 810H for shock and vibration
- Spring base flexes under wind and low-branch impacts instead of snapping
- Includes low-loss coax cable; pairs with the weBoost Drive Reach booster
Use cases
Built for overlanders running a weBoost Drive Reach who need a trail-rated exterior antenna that clears a loaded roof. Raise it above a rack, basket, or roof tent for a clean line to the tower, or swap it onto an existing Drive Reach install when you start taking the rig off-pavement.
- Part number: 311248 (SKU WEBO311248)
- Antenna type: Omnidirectional, vertical polarization
- Frequency range: 698-2700 MHz (700/800/1700/1900/2200 MHz bands)
- Gain: 4 dB
- Impedance: 50 ohm
- Connector: SMA-Male
- Cable: Low-loss coax included (~16 ft)
- Mast: 13-in extension, adjusts 7.5-20.5 in; optional 18-in extension
- Weatherproof rating: IP66
- Durability standard: MIL-STD 810H
- Base: Spring base (wind / branch impact absorbing)
- Mounting hardware: Not included (901168 mount or 311249 kit sold separately)
- Compatibility: weBoost Drive Reach Overland booster system
Does this include a mount?
No. Mounting hardware is sold separately. The antenna ships with the spring base, adjustable mast, and coax. Mount it with the weBoost Overland mount (901168), or buy the 311249 kit that bundles the bracket.
Which booster does it work with?
It's the exterior antenna for the weBoost Drive Reach Overland system and connects to the Drive Reach amplifier. You can swap it onto an existing Drive Reach exterior antenna if you're upgrading to the trail-rated unit.
Will it survive the trail?
Yes. It's sealed to IP66 against dust and water, built to MIL-STD 810H for shock and vibration, and the spring base flexes when it takes a hard gust or a low branch instead of breaking off.
Does the antenna boost signal by itself?
No. This is the exterior antenna, not an amplifier. It needs a weBoost Drive Reach booster to actually improve your signal. On its own it just collects the tower signal for the booster to amplify.