TRUKD Traction Board Mount
TRUKD Traction Board Mount
The TRUKD Traction Board Mount is a pair of 3/16" aluminum brackets that secure most popular recovery boards — MAXTRAX, TRED Pro, and similar designs — to any TRUKD V2 rack position or any rack using a T-slot extrusion. All hardware is stainless steel. Made in Pittsburgh, PA.
On TRUKD racks, the mount attaches at faceplates, crossbars, front-to-back connectors, or V2 accessory panels. Single T-slot bars allow parallel mounting only — the board runs along the extrusion. Dual-slot bars allow perpendicular mounting, so the board can run laterally across the rack. On non-TRUKD T-slot racks, the mount works the same way; hardware for non-TRUKD extrusion sizes is not included.
Built-in 2.75" linear adjustment lets you dial the exact position to your boards, and the flip-reversible bracket design accommodates smaller or larger board footprints without relocating the mount on the rack. Traction boards sold separately. Included: 2× mounting brackets, 4× stainless steel board bolts with washers and nuts, 4× thumbscrews, TRUKD rack mounting hardware.
No se pudo cargar la disponibilidad de retiro
Overview
Aluminum traction board mount for TRUKD racks and any T-slot system. Fits most popular recovery boards with 2.75" linear adjustment and a flip-reversible design for different board footprints.
Key features
- 2.75" linear adjustment — dial position to board length without moving the rack mount
- Flip-reversible: accommodates smaller or larger board footprints
- Compatible with TRUKD faceplates, crossbars, front-to-back connectors, and accessory panels
- Works on any T-slot rack (single-slot = parallel mounting only; dual-slot = perpendicular possible)
- 3/16" aluminum brackets with stainless steel hardware — corrosion-resistant for outdoor and trail use
Use cases
The Traction Board Mount is for overlanders and off-road builds where recovery gear needs to be on the rack and reachable, not buried in the bed. It mounts on any TRUKD V2 rack position with a T-slot or faceplate, and the 2.75" adjustment range covers most popular traction board sizes including MAXTRAX and TRED-style designs.
- Material: 3/16" aluminum brackets, stainless steel hardware
- Linear Adjustment: 2.75"
- Design: Flip-reversible for small/large boards
- Mount Compatibility: TRUKD faceplates, crossbars, front-to-back connectors, accessory panels; any T-slot rack system
- T-Slot Note: Single-slot bars = parallel mounting only; dual-slot bars = perpendicular mounting possible
- Included: 2× mounting brackets, 4× SS board bolts/washers/nuts, 4× thumbscrews, TRUKD rack mounting hardware
- Weight: 2,268 g (5 lb)
- Manufactured: Pittsburgh, PA, USA
- Origin: Made in USA
What traction boards does this mount fit?
The mount is designed for most popular brands including MAXTRAX and TRED-style boards. The 2.75" linear adjustment and flip-reversible design accommodate different footprints. Verify your board's mounting hole pattern before ordering.
Does this mount work on non-TRUKD racks?
Yes, if your rack uses a T-slot extrusion. Single T-slot bars allow parallel mounting only; dual-slot bars allow perpendicular mounting as well. Hardware for non-TRUKD extrusion sizes is not included — you'll need to source mounting hardware for your specific profile.
Where on a TRUKD rack can I mount this?
Faceplates, crossbars, front-to-back connectors, and V2 accessory panels are all valid mounting positions.
What's included in the box?
Two traction board mounting brackets, four stainless steel board bolts with washers and nuts, four thumbscrews, and TRUKD rack mounting hardware.
Are traction boards included?
No. This is the mounting hardware only — traction boards are sold separately.
Can I mount the boards horizontally or vertically?
Mount orientation depends on your rack position and available T-slot direction. Single T-slot bars limit you to parallel mounting (along the extrusion). Dual-slot bars allow perpendicular mounting as well.