EZ FLATE Rapid Locking Air Chucks
EZ FLATE Rapid Locking Air Chucks
The EZ FLATE Rapid Locking Air Chucks are quick-connect chucks for the valve stems a standard press-on chuck fights: APEX RPVs, Toyota recessed wheels, and metal TPMS stems. Push the chuck onto the stem until it locks, then pull the sleeve back to release. Both moves are one-handed, so you can set it and walk to the next tire while it airs down or up.
The default order is a Set of 4, which covers all four tires and ships with Teflon tape for sealing your connections. Need just one? Pick the Single Chuck. Upgrading an existing inflator hose? The Barbed Chuck comes with a hose barb and clamp and swaps onto a single line. The Schrader and Plug Adapter options cover the rest of common fittings.
These are made for vehicle tire valve stems only. They are not for innertubes or bike tire valves. If you already run chucks that seat clean on your stems, you do not need these. They are the fix for tricky fitment.
No se pudo cargar la disponibilidad de retiro
Overview
Quick-locking tire air chucks designed for hard-to-reach valve stems, including APEX RPVs, Toyota recessed wheels, and metal TPMS stems. Push to lock on, pull the sleeve to release, one hand each way.
Key features
- Push-to-lock, pull-sleeve-to-release operation, one-handed both directions
- Built for APEX RPVs, Toyota recessed wheels, and metal TPMS stems that defeat press-on chucks
- Stays locked hands-free so you can air multiple tires at once
- Default Set of 4 includes Teflon tape for sealing connections
- Variant options: Set of 4, Single Chuck, Barbed Chuck (with hose barb and clamp), Schrader adapter, Plug Adapter
Use cases
Airing down before the trail and back up after, on rigs with recessed wheels or aftermarket metal TPMS stems where a clip-on or press-on chuck won't seat. The Barbed Chuck variant lets you retrofit one onto an existing inflator hose instead of replacing the whole setup.
- Operation: Push to lock, pull sleeve to release (one-handed)
- Fits: APEX RPVs, Toyota recessed wheels, metal TPMS stems, standard vehicle tire valve stems
- Not for: Innertubes or bike tire valve stems
- Set of 4 includes: 4 chucks plus Teflon tape
- Barbed Chuck includes: Hose barb and clamp
- Variant options: Set of 4, Single Chuck, Barbed Chuck, Rapid Locking Chuck to Schrader, Plug Adapter
Will these fit Toyota recessed wheels and metal TPMS stems?
Yes. That's exactly what they were built for. They lock onto APEX RPVs, Toyota recessed wheels, and metal TPMS stems, the stems where a standard press-on chuck won't seat square.
How do they connect and release?
Push the chuck onto the valve stem until it locks, then pull the sleeve back to release. One hand does each step, so you're not threading anything on or fighting it off.
How many chucks do I get, and what's in the box?
The default Set of 4 covers all four tires and includes Teflon tape. The Single Chuck is one unit. The Barbed Chuck ships with a hose barb and clamp to upgrade a single inflator hose line.
Can I use these on bike tires or innertubes?
No. These are for vehicle tire valve stems only. Innertubes and bike valves aren't supported.
I already run locking chucks that work fine. Do I need these?
Only if your current chucks struggle on certain stems. If they seat clean on your valve stems already, you don't need to upgrade. These are the fix specifically for tricky fitment like recessed wheels and metal TPMS stems.