Ir directamente a la información del producto
1 de 1

RacksBrax XD RTT Adjustable Awning Brackets, Triple

RacksBrax XD RTT Adjustable Awning Brackets, Triple

Precio habitual $240.00
Precio habitual Precio de oferta $240.00
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

The RacksBrax XD RTT Adjustable Awning Brackets (Triple) is a three-bracket set that mounts an awning to the side channel of a rooftop tent. The brackets are stainless steel with a black powder coat finish, and each one is rated to carry 44 lb (20 kg). They fit RTT side channels spaced 33 to 60 mm (1.3 to 2.36 in) center-to-center, and each bracket is height adjustable so you can line the awning up where you want it.

A triple set exists for a reason. An awning will often bolt up on two brackets, but a heavier awning, or a tent with a conservative per-position load limit, needs a third bracket to spread the weight so no single mounting point carries too much. The bracket's 44 lb rating is the ceiling for the hardware, not for your tent. The tent manufacturer's permitted load per mounting position always governs, so check that number first.

The set ships with stainless steel fasteners for bracket assembly. The M8 fasteners that attach the brackets to your tent's channels are not included. Source those to match your RTT model. These brackets are built to pair with the RacksBrax XD Hitch (Triple) 9001, a quick-release hitch sold separately that lets you pop the awning off the tent in seconds for storage or to drop drag on a long highway leg.

Cantidad
Ver todos los detalles

Overview

A three-bracket kit for hanging an awning off the side channel of a rooftop tent. Stainless steel, black powder coat, height adjustable, 44 lb per bracket. The triple count spreads a heavier awning's load across more mounting points.

Key features

  • Three brackets per set, stainless steel with black powder coat finish
  • 44 lb (20 kg) rated load per bracket
  • Fits RTT side channels 33-60 mm (1.3-2.36 in) center-to-center
  • Height adjustable to position the awning where you want it
  • Stainless assembly fasteners included
  • Designed to pair with the RacksBrax XD Hitch (Triple) 9001 quick-release hitch (sold separately)

Use cases

Mount an awning alongside a rooftop tent so both share one rack footprint. The triple configuration suits heavier awnings, or tents with a lower permitted load per mounting position, where two brackets would put too much weight on any single point. Paired with the matching XD quick-release hitch, the awning lifts off in seconds for out-of-weather storage or to cut highway drag.