Kammok Puffin Pillow
Kammok Puffin Pillow
The Kammok Puffin Pillow is an air-inflatable camp pillow that weighs about 2 oz and packs down to roughly 4.5 x 2.75 x 1 inches — about the size of a phone. Inflated, it runs 17.5 x 10 x 3 inches, with a curved, scalloped neck cut that cradles your head and shoulders instead of letting them slide off the edge.
A single one-way micro-adjust valve sets the firmness. Inflate to full for a taller pillow, or bleed a little air for a softer, lower profile that side-sleepers tend to prefer. It takes about 30 breaths by mouth, or a few squeezes with the Pongo inflation sack. The cover is a 50D 4-way-stretch polyester with a sueded finish, so it stays quiet and soft against your face instead of crinkling like a bare bladder.
It packs into a Diamond Shell ripstop nylon stuff sack and ships with a tie-down kit — shock cords and toggles that loop through welded eyelets on the pillow and hook to the gear loop on a Kammok Roo or Mantis hammock so it doesn't slide out from under you overnight. The kit is optional: leave it off and the Puffin works as a standalone pillow in a tent, on a pad, or on a plane.
No se pudo cargar la disponibilidad de retiro
Overview
The Puffin is a ~2 oz air-inflatable pillow that packs to phone size and inflates to 17.5 x 10 x 3 inches. A micro-adjust valve dials firmness, and an included tie-down kit clips it to a Kammok hammock so it stays put.
Key features
- Packed size: ~4.5 x 2.75 x 1 in; weighs about 2.1 oz (60 g) on its own, ~2.9 oz (82 g) with the stuff sack and tie-down kit.
- Micro-adjust valve: single one-way valve sets firmness — full for a taller pillow, partial for a lower, softer profile. ~30 breaths by mouth or a few squeezes with the Pongo pump sack.
- Scalloped neck cut: curved edge cradles the head and shoulders instead of letting them roll off.
- Sueded cover: 50D 4-way-stretch polyester with a sueded finish — quiet and soft, no bare-bladder crinkle.
- Hammock tie-down kit: shock cords and toggles thread through welded eyelets and hook to a Kammok Roo or Mantis gear loop. Optional — remove it for ground or travel use.
Use cases
Built for overland and backpacking sleep setups where pack space and ounces matter. Clip it into a Kammok hammock so it doesn't slide out overnight, run it standalone in a tent or on a sleeping pad, or stuff it in a pack lid or carry-on as a travel pillow.
- Inflated dimensions: 17.5 x 10 x 3 in
- Packed dimensions: ~4.5 x 2.75 x 1 in
- Weight (pillow): ~2.1 oz / 60 g
- Weight (with stuff sack + kit): ~2.9 oz / 82 g
- Inflation: air, single one-way micro-adjust valve (~30 breaths by mouth)
- Cover fabric: 50D 4-way-stretch polyester, sueded finish
- Stuff sack: Diamond Shell ripstop nylon (PU + DWR)
- Hammock compatibility: Kammok Roo (Single, Single UL, Double, Double XL), Mantis, Mantis UL
- Color: Granite Grey
How do you inflate it, and how many breaths does it take?
It uses a single one-way micro-adjust valve. Plan on about 30 breaths by mouth, or a few squeezes if you pair it with the Pongo inflation sack. The one-way valve holds air while you top off, so you don't lose progress between breaths.
Will it stay put in a hammock?
Yes. The included tie-down kit — shock cords and toggles — loops through welded eyelets on the pillow and hooks to the gear loop on a Kammok Roo or Mantis hammock, so it doesn't slide out from under you overnight.
Can I use it on the ground, not just in a hammock?
Yes. The tie-down kit is optional. Leave it off and the Puffin works as a standalone camp or travel pillow in a tent, on a sleeping pad, or on a plane.
How firm is it, and can I adjust it?
The micro-adjust valve lets you add or bleed air to tune firmness. More air gives a taller, firmer pillow; letting some out drops it to a softer, lower profile that side-sleepers often prefer.
How do I clean it?
Spot-clean the sueded cover with mild soap and water, then air-dry it fully before packing. Don't machine-wash or dry the air bladder, and make sure it's dry before it goes back in the stuff sack to avoid trapped moisture.