Rollercam Overland Kit

The Rollercam Overland Kit is a cam-buckle tie-down set that covers the strap sizes an overland rig actually uses, packed in one ripstop nylon bag. You get Expedition straight-end straps in 2', 3', 4', 9', and 15' lengths (two of each), a pair of 6' loop ends, a pair of 6' hook ends, and a pair each of narrower 3' straps in 0.75" and 1.25" widths for lighter gear. A 2-pack of Roperollers rounds it out for coiling cord and webbing. Every strap runs the patented Rollercam buckle, rated to a 350 lb working load with a 3:1 safety factor.

What sets the Rollercam buckle apart is the brass roller. It lets you re-tension a strap after the load settles — pull the tail and snug it tighter without unthreading anything. The cam holds that tension under vibration, so loads stay put on washboard and rough two-track instead of working loose. Releasing is a one-hand thumb push. There's no ratchet handle to tangle and no way to over-crank the webbing.

The webbing is UV-resistant, high-tenacity polypropylene with woven-in length markers, triple-bar tack stitching, and T-135 polyester thread. Straight ends thread through anchor points, loop ends stay captive so they can't slip free, and hook ends grab metal tie-downs and D-rings. Buy the kit and you skip pricing ends and webbing piecemeal.