MAXTRAX Rope Dampener
MAXTRAX Rope Dampener
The MAXTRAX Rope Dampener is a fill-yourself winch line blanket that adds mass and friction to a line under load. It measures 53 cm by 39 cm (about 21" by 15") empty and weighs 320g before you add weight. The shell is 420 Denier Oxford nylon with polypropylene webbing, so it shrugs off grit and rinses clean.
It does one job and does it well. A winch line or kinetic strap stores a huge amount of energy when it's loaded. If a rope, shackle, or strap lets go mid-pull, that energy has to go somewhere, and a bare line snaps back fast and high. Drape this over the line first, fill the two sleeves with sand or a couple of water bottles, and the added weight drags the line toward the ground instead of toward the cab if it fails.
Use it with synthetic rope or steel cable. It attaches to a rope loop with a MAXTRAX Fuse Shackle and sits best near the middle of the line. Rinse it with fresh water after a muddy recovery, air dry it, and store it dry. It ships empty by design so you fill it with weight you already carry.
No se pudo cargar la disponibilidad de retiro
Overview
The MAXTRAX Rope Dampener is a winch line safety blanket. You drape it over a loaded recovery line and fill its two sleeves with weight so that if the line fails, it falls instead of whipping back.
Key features
- 420 Denier Oxford nylon shell with polypropylene webbing
- Two open sleeves you fill with sand or water bottles for mass
- 53 cm by 39 cm (about 21" by 15") empty; 320g before filling
- Attaches to a rope loop with a MAXTRAX Fuse Shackle
- Works with synthetic rope and steel winch cable
- 1-year warranty
Use cases
Use it any time you put real load on a recovery line, whether you're winching a stuck rig out or running a kinetic snatch strap. Two dampeners, one each side of the rigging, is a common setup for long high-load pulls.
- Material: 420 Denier Oxford nylon, polypropylene webbing
- Dimensions (empty): 53 cm × 39 cm (about 21" × 15")
- Weight (empty): 320g
- Sleeves: 2, fill with sand or water bottles
- Attachment: rope loop via MAXTRAX Fuse Shackle
- Line compatibility: synthetic rope and steel cable
- SKU: MTXRD
- Warranty: 1 year
What does a rope dampener actually do?
It adds weight and drag to a recovery line. If a winch line or strap fails under load, the dampener pulls the line down toward the ground instead of letting it whip back at head height.
How much weight do I put in it?
Fill the two sleeves with sand or water bottles. About 5 lb is a common starting point for most rigs; more mass means the line drops harder if it fails.
Where on the line does it go?
Drape it over the line before you put it under tension, positioned near the middle of the rope and close to the Fuse Shackle.
Does it work with synthetic rope and steel cable?
Yes. A draped dampener saps energy from synthetic rope or steel winch cable the same way.
How do I clean and store it?
Rinse it with fresh water, air dry it, and store it dry. Don't use it if it's frayed or burned; replace damaged recovery gear.
Do I need two of them?
One covers most self-recoveries. For long, high-load pulls many people run two, one on each side of the rigging.