MAXTRAX Recovery Kit Bag
MAXTRAX Recovery Kit Bag
The MAXTRAX Recovery Kit Bag is a triple-layer 600D polyester carry bag built to hold your recovery accessories — not the boards, the gear that goes with them. It measures 600 × 400 × 240 mm (23.6 × 15.7 × 9.4 in) when filled and packs a large internal cavity plus 5 external pockets, so shackles, the winch ring, the hitch, and gloves each get a spot you can find in the dark.
The 600D shell is PVC-coated and weather-resistant, so muddy ropes and sandy shackles go straight back in instead of riding loose in your cargo area. Buyers report fitting two recovery ropes (a 10-footer and a 30-footer), four soft shackles, a tree saver, a recovery ring, and gloves with room to spare. Two external cylindrical pouches are sized for the MAXTRAX Hitch or double as bottle holders during a dig-out.
The rectangular footprint and low center of gravity let the bag stack flat under a drawer system or sit square in a cargo platform, then pull out as one grab-and-go unit when the trail turns soft. It ships with a removable shoulder strap and grab handles. Note: this is a kit bag for accessories, not a traction-board bag — the MAXTRAX boards mount separately.
No se pudo cargar la disponibilidad de retiro
Overview
A weather-resistant 600D polyester bag that corrals a full recovery accessory kit — shackles, ropes, winch ring, hitch, and gloves — into one organized, grab-and-go unit. It carries the gear, not the traction boards.
Key features
- Triple-layer 600D polyester shell with PVC coating and polyester lining; weather-resistant for muddy, sandy, or wet gear
- 5 external pockets plus a large internal cavity for ropes
- 2 external cylindrical pouches sized for the MAXTRAX Hitch or hydration
- Removable shoulder strap and grab handles
- Rectangular, low-center-of-gravity footprint that stacks flat and stays modular
- 600 × 400 × 240 mm (23.6 × 15.7 × 9.4 in) when filled
Use cases
Consolidates a recovery kit that otherwise scatters across the cargo area — ropes, soft shackles, a tree saver, a recovery ring, and gloves all land in one bag you can grab when the trail goes soft. The flat rectangular shape stows under a drawer system or stacks in a cargo platform and pulls out as a single unit at the recovery point.
- Material: 600D polyester, PVC-coated, polyester lining
- Construction: Triple-layer, weather-resistant
- Dimensions (filled): 600 × 400 × 240 mm (23.6 × 15.7 × 9.4 in)
- External pockets: 5
- External pouches: 2 cylindrical (MAXTRAX Hitch / hydration)
- Carry: Removable shoulder strap + grab handles
- Holds: Recovery accessories (shackles, ropes, winch ring, hitch, gloves) — not traction boards
- SKU: MTXRKB
Does this bag hold the MAXTRAX traction boards too?
No. This is a kit bag for the recovery accessories — shackles, ropes, the winch ring, the hitch, and gloves. The MAXTRAX boards mount separately and don't go in this bag.
What gear actually fits inside?
Buyers report fitting two recovery ropes (a 10-foot and a 30-foot), four soft shackles, a tree saver, a recovery ring, and gloves with room to spare. There are 5 external pockets plus a large internal cavity, and two cylindrical pouches sized for the MAXTRAX Hitch.
How big is it, and will it fit my cargo area?
It measures 600 × 400 × 240 mm (23.6 × 15.7 × 9.4 in) when filled. The rectangular footprint and low center of gravity let it stack flat under a drawer system or sit square in a cargo platform.
Is it actually waterproof?
It's weather-resistant, not submersible. The triple-layer 600D shell with a PVC coating shrugs off mud, sand, and rain so dirty recovery gear goes straight back in — but it isn't a sealed dry bag, so don't treat it like one.
How do I keep it in good shape?
Rinse and air-dry the bag after sandy or muddy recoveries before you load the gear back in. Letting grit and moisture sit inside is the fastest way to wear out the lining and your kit.