MAXTRAX Mini + JaxBase Combo (Signature Orange)
MAXTRAX Mini + JaxBase Combo (Signature Orange)
This combo pairs one MAXTRAX Mini traction board with one JaxBase. The Mini is a 25 x 13 x 3.5 in board built from UV-stabilized, engineering-grade reinforced nylon. It's the short-format MAXTRAX, sized for rigs where a full-length board won't fit, and it's the board you wedge under a tire to claw out of sand, mud, or snow.
The JaxBase is the other half of the kit, and it does two jobs. It mounts the Mini board to your rig with no tools, so the board rides where you can reach it and lifts off by hand when you need it. Flip the JaxBase over and it becomes a wide, flat footing for a bottle or scissor jack, so the jack doesn't sink when you lift a wheel on soft or slippery ground.
The Mini weighs 4.4 lb and the JaxBase about 4.85 lb, so the whole combo is light enough to keep on board without thinking about it. Made in Australia from the same tough nylon MAXTRAX is known for.
No se pudo cargar la disponibilidad de retiro
Overview
One MAXTRAX Mini traction board plus one JaxBase. The Mini gets you unstuck in sand, mud, or snow; the JaxBase mounts that board with no tools and doubles as a jack base on soft ground.
Key features
- One Mini traction board — 25 x 13 x 3.5 in, UV-stabilized reinforced nylon, 4.4 lb, sized for space-limited rigs
- JaxBase mount — clamps the Mini board to your rig with no tools; lift the board off and re-seat it by hand
- JaxBase jack base — flips over to give a bottle or scissor jack a wide, stable footing on soft or slippery ground
- Combo weight — about 9-11 lb packed (Mini 4.4 lb + JaxBase ~4.85 lb)
- Made in Australia from engineering-grade reinforced nylon
Use cases
Run the Mini under a spinning tire to self-recover from sand, mud, or snow on a rig that can't carry a full-length board. Keep the JaxBase mounted as your board carrier, then pull it down and flip it whenever you need to change a tire or lift a wheel on ground too soft for a bare jack.
- Contents: 1 x MAXTRAX Mini traction board, 1 x JaxBase
- Mini board dimensions: 25 x 13 x 3.5 in
- Mini board weight: 4.4 lb
- JaxBase weight: ~4.85 lb
- Combo weight: ~9-11 lb packed
- Material: UV-stabilized, engineering-grade reinforced nylon
- Color: Signature Orange
- Origin: Made in Australia
- JaxBase function: No-tools board mount + jack base
- SKU: MTXMJB
What's actually in the box?
One MAXTRAX Mini traction board and one JaxBase. The JaxBase is a dual-purpose unit: it mounts the Mini board and flips over to work as a jack base. This is not a pair of boards.
Does the JaxBase let me mount and pull the board without tools?
Yes. The Mini board nests onto the JaxBase via its accessory points, so you can lift it off and re-seat it by hand. No tools needed.
Can the JaxBase really be used as a jack base?
Yes. Flip it over and it gives a bottle or scissor jack a wide, stable footing so the jack doesn't sink into soft or slippery ground when you lift a wheel.
Is the Mini long enough to bridge ruts like a full-size board?
No. The Mini is the compact, 25 in board. It's built for traction and storage in tight rigs, not for bridging long gaps the way a full-length MKII does.
What's it made of, and will it hold up to sun and grit?
Both pieces are UV-stabilized, engineering-grade reinforced nylon. Rinse grit off the traction cleats after sandy recoveries and the board keeps its bite.
How much does the combo weigh?
The Mini board is 4.4 lb and the JaxBase is about 4.85 lb, so the full combo runs roughly 9-11 lb packed.