Kabari SuperFly Hardshell Wedge Rooftop Tent
Kabari SuperFly Hardshell Wedge Rooftop Tent
The Kabari SuperFly is a low-profile hardshell wedge rooftop tent that sleeps two adults and mounts at 105 lb. The rigid PVC top sits over an aluminum frame, so the whole thing folds down to 7.75 in tall on the roof (6.25 in without the rails). That low stance keeps it out of the wind and easy on fuel compared to a tall box tent.
Setup is a gas-strut clamshell: pop the latches and the wedge lifts itself in under a minute. Inside you get 47 in of width, 80 in of length, and 56 in of peak height to sit up. The bed is a 46.5 x 79.5 in sleeping platform with a 2 in foam mattress over a condensation mat. The PVC shell and 4-season build hold up to cold and wet; two 43 x 38 in side windows and a 31 x 45 in rear door zip open for airflow or shut tight in bad weather. A 25.5 in dimmable USB LED bar lights the inside, and two 5.5 in HVAC ports (one per side) let you run a heater or 12V cooler line through a zippered pass-through.
Everything to bolt it down ships in the box: a ladder with a storage bag, two 51 in roof crossbars with hardware, mounting plates, rain-fly poles, and pre-installed brackets, hinges, and latches. Gear storage includes six header pockets, a clear tablet sleeve, and a boot bag plus gear loft to keep the floor clear.
No se pudo cargar la disponibilidad de retiro

Overview
The Kabari SuperFly is a 105 lb hardshell wedge rooftop tent for two adults, built around a rigid PVC top and an aluminum frame for a low, fuel-friendly profile. A gas-strut clamshell opens it in under a minute.
Key features
- Low-profile wedge: 7.75 in tall closed (6.25 in without rails), 105 lb mounting weight
- Sleeps 2 on a 46.5 x 79.5 in platform with a 2 in foam mattress and condensation mat
- 47 x 80 in interior with 56 in of peak height to sit upright
- 4-season waterproof PVC top; two 43 x 38 in side windows and a 31 x 45 in rear door
- Two 5.5 in HVAC ports and a 25.5 in dimmable USB LED light bar
Use cases
Built for low builds where height and fuel matter — Jeeps, midsize trucks, and daily drivers that still want to camp on the weekend. The gas-strut clamshell makes it a fast overnight base: deploy and stow in minutes without unzipping a cover or fighting poles.
- Mounting footprint: 50.25 x 86.5 x 7.75 in (6.25 in tall without rails)
- Interior dimensions: 47 W x 80 L x 56 H in
- Sleeping platform: 46.5 x 79.5 in
- Mattress: 2 in foam over condensation mat
- Mounting weight: 105 lb
- Capacity: 2 adults
- Shell: rigid PVC top over aluminum frame, hardshell wedge
- Setup: gas-strut clamshell, under a minute
- Seasons: 4-season
- Windows / door: two 43 x 38 in side windows, 31 x 45 in rear door
- HVAC ports: two 5.5 in, one per side, zippered wire access
- Lighting: 25.5 in dimmable USB LED bar
- Storage: 6 header pockets, clear tablet sleeve, boot bag, gear loft
- Included: ladder with bag, two 51 in crossbars + hardware, mounting plates, rain-fly poles
- SKU: 230HSKABSF
How many people does it sleep, and how big is the bed?
Two adults. The sleeping platform is 46.5 x 79.5 in with a 2 in foam mattress over a condensation mat.
Can I sit up inside?
Yes. Interior peak height is 56 in at the tall end of the wedge, with 47 x 80 in of floor space.
Is it really lighter than a normal hardshell?
Yes. Mounting weight is 105 lb, light for a hardshell-style wedge thanks to the PVC top and aluminum frame. Check your rack's dynamic load rating against that 105 lb before you install.
Can I run a heater or cooler into it?
Two 5.5 in HVAC ports, one per side, with zippered wire access let you feed a diesel heater or 12V cooler line inside without leaving a gap.
How does it handle cold and wet weather?
It's rated 4-season with a waterproof PVC top. The two 43 x 38 in side windows and 31 x 45 in rear door zip fully shut in bad weather. Vent them when you can and dry the tent before long-term closed storage to keep condensation down.
What comes in the box for mounting?
A ladder with a storage bag, two 51 in roof crossbars with hardware, mounting plates, rain-fly poles, the LED light with USB cable, and pre-installed brackets, hinges, and latches.