ICECO VL75Pro/VL90Pro Mounting Slide (Side-Pull)
ICECO VL75Pro/VL90Pro Mounting Slide (Side-Pull)
This is the side-pull fridge slide built for the ICECO VL75ProD and VL90ProD. Instead of dragging the fridge out the back, the platform extends sideways toward the door — from a 38.9 x 22.2 x 3.3 in closed footprint out to 41.5 in fully open. That lets you lift the lid from the curb side of a packed cargo bay, no tailgate reach required.
The frame and rails are heavy-duty steel, sized for vibration and washboard roads. A 3-position lock holds the platform closed in transit and at partial or full extension, and four tie-down straps come in the box to lock the fridge down on top. Fitment is specific: VL75ProD and VL90ProD only. It will not carry the smaller VL35/45/60 Pro or APL fridges, which ride on their own slides.
It bolts to a drawer, platform, or cargo floor through the base plate, so it drops into most custom van, SUV, and truck builds. ICECO does not publish a fixed bolt pattern, so plan your mounting points against your own platform before you drill.
No se pudo cargar la disponibilidad de retiro
Overview
A steel side-pull mounting slide for the ICECO VL75ProD and VL90ProD. The platform extends laterally toward the side of the vehicle, so the fridge lid is reachable from the door without pulling the unit out the back.
Key features
- Side-pull travel — extends sideways from a 38.9 x 22.2 x 3.3 in closed footprint to 41.5 in fully open.
- Heavy-duty steel frame and rails — built for vibration and rough terrain.
- 3-position lock — secures the platform closed, partly open, and fully open.
- Four tie-down straps included — strap the fridge to the platform for transit.
- Model-specific fitment — VL75ProD and VL90ProD only.
Use cases
Built for side-access builds where there's no room to pull a fridge out the back — drawer systems, cargo platforms, and van or SUV galleys worked from the side door. Mount it so the platform opens toward your access point and the fridge lid sits within reach the moment you park.
- Compatible fridges: ICECO VL75ProD, VL90ProD
- Pull direction: side-pull (lateral)
- Closed dimensions (L x W x H): 38.9 x 22.2 x 3.3 in
- Extended length: 41.5 in
- Frame material: heavy-duty steel
- Locking positions: 3-position
- Tie-down straps included: 4
- Mounting: bolts through base plate to drawer, platform, or cargo floor
- SKU: ICEC-MC-VL75PRO-SLIDE-S
Which fridges does this slide fit?
The VL75ProD and VL90ProD only. It is not sized for the VL35, VL45, or VL60 Pro or the APL coolers — those ride on their own slides.
Which way does the fridge come out?
Sideways. The platform extends toward the side of the vehicle, so you open the lid from the door instead of reaching over the tailgate. That is the point of the side-pull versus a rear-pull slide.
How far does it extend?
From a 38.9 in closed footprint out to 41.5 in fully extended.
Will it stay put while I drive?
Yes. A 3-position lock holds the platform closed in transit, and four tie-down straps come in the box to strap the fridge to the platform on top.
What is it made of, and will it survive off-road?
A heavy-duty steel frame and rails, built to take vibration and washboard roads. ICECO does not publish a load-rating number; the slide is rated by fridge fitment rather than a posted weight limit.
Do I have to drill to install it?
It bolts to a drawer, platform, or cargo floor through the base plate. ICECO does not publish a fixed bolt pattern, so confirm your mounting points against your own platform before you drill. After a hard trip, keep grit off the rails and re-snug the bolts.