ICECO VL45Pro Insulated Fridge Cover
ICECO VL45Pro Insulated Fridge Cover
This is the model-specific insulated cover for the ICECO VL45Pro (45L 12V fridge/freezer). It is cut for that body and fits the VL45ProS (single zone) and the VL45ProD (dual zone). Wrong fridge means a sloppy fit, so this one is sized for the VL45Pro and nothing else.
The cover adds a layer of insulation over a water-resistant oxford nylon shell. That extra insulation slows heat soak into the box, so the SECOP compressor cycles less and pulls fewer amps from your battery. It matters most in hot weather and on long off-grid runs where every amp-hour counts. The shell itself takes the abuse: trail dust, campsite grit, light spray, and the scuffs that chew up a bare metal fridge over a season.
Access panels and cutouts let you flip the lid, reach the control panel, and read the display without pulling the cover off. Built-in pockets hold the DC cord and small kit. When the trip is over it folds flat for storage. Cover only; the VL45Pro fridge is sold separately.
No se pudo cargar la disponibilidad de retiro
Overview
A custom-fit insulated cover for the ICECO VL45Pro (45L 12V fridge/freezer), sized for both the VL45ProS single-zone and VL45ProD dual-zone bodies. It cuts power draw, knocks down noise, and shields the fridge from trail abuse.
Key features
- Sized for the ICECO VL45Pro (VL45ProS and VL45ProD); will not fit other ICECO models
- Insulating layer lowers compressor cycling and battery draw, most useful in heat and off-grid
- Water-resistant oxford nylon outer shell sheds dust, dirt, and light spray
- Access cutouts for the lid, control panel, and display so you operate the fridge with the cover on
- Accessory pockets for the DC cord and small gear; folds flat for storage
Use cases
Built for overland and off-road rigs where the fridge lives in the bed, the back of a 4x4, or under a roof tent. The cover holds temp longer overnight and runs quieter, and on multi-day off-grid trips the lower power draw stretches your battery and solar budget.
- Fits: ICECO VL45Pro (45L 12V fridge/freezer) — VL45ProS single zone and VL45ProD dual zone
- Outer material: Water-resistant oxford nylon
- Construction: Insulated, foldable, custom-fit
- Access: Cutouts for lid, control panel, and display
- Storage: Accessory pockets; folds flat
- SKU: ICEC-MC-VL45PRO-COVER
- Shipping weight: 2495 g (5.5 lb)
- Sold as: Cover only (fridge not included)
Will it fit my fridge?
It is cut for the ICECO VL45Pro (45L 12V fridge/freezer). It fits the VL45ProS single zone and the VL45ProD dual zone. It is sized for that body only, so it will not fit other ICECO models.
Does the insulated cover actually cut power draw?
Yes. The added layer slows heat soak into the box, so the compressor cycles less and pulls fewer amps. The savings are biggest in hot weather and on long off-grid stretches; exact numbers depend on ambient temperature and your setpoint.
Can I use the fridge with the cover on?
Yes. Access panels and cutouts let you open the lid, reach the control panel, and read the display without taking the cover off. Keep the compressor vents clear so the unit can breathe.
What is it made of, and is it weatherproof?
The outer shell is water-resistant oxford nylon over an insulating layer. It sheds trail dust, dirt, and light spray, and protects the fridge's finish from scuffs. Wipe it down and let it air-dry before folding it for storage.