Heretic Roof Rack Handle with Scene Light (Pair)
Heretic Roof Rack Handle with Scene Light (Pair)
The Heretic Roof Rack Handle with Scene Light is a pair of CNC-machined 6061 billet aluminum grab handles, each with a 600-lumen LED built into the body. They bolt to the side of your roof rack and give you a solid, fixed grip to pull yourself up onto the roof or haul gear over the rail. Each light is aimed 30 degrees down, so it throws light on the ground beside the rig instead of glaring off the roof.
Each handle draws 0.4A at 13.8V, so running both pulls under 1A total. The housing is IP68 sealed against dust and water, and it runs anywhere from 9V to 24V. Lenses are clear out of the box and pop out for color swaps later. The light module measures 3 x 1.5 x 2 inches and sits flush in the handle body, with cooling fins machined into the single block.
The pair ships with both handles, mounting hardware, and two butt splices with heat shrink. The switch and power harness are sold separately, so plan on wiring those in during install.
No se pudo cargar la disponibilidad de retiro
Overview
A pair of 6061 billet aluminum roof-rack grab handles with an integrated 600-lumen LED in each. They give you a fixed hand-hold for climbing up and loading the roof, plus down-aimed scene lighting beside the rig.
Key features
- CNC-machined 6061 billet aluminum housing, single block with cooling fins
- 600 lumens per handle, 6W, aimed 30 degrees downward
- 0.4A draw at 13.8V per light; 9V to 24V compatible
- IP68 sealed against dust and water
- Clear interchangeable lenses (replacements sold separately)
- Ships as a pair with mounting hardware and two butt splices
Use cases
Bolt them to the side of a roof rack as the spot you grab to climb up or pull gear over the rail, instead of stressing the rack itself. The 30-degree downward beam also works as scene lighting for setting up camp or finding gear next to the vehicle after dark.
- Housing: 6061 CNC billet aluminum, single block with cooling fins
- Sold as: pair (2 handles)
- Light output: 600 lumens per handle
- Wattage: 6W per handle
- Current draw: 0.4A at 13.8V per handle
- Voltage: 9V to 24V
- Beam angle: 30 degrees downward
- Light module size: 3 x 1.5 x 2 in (L x D x H)
- Lens: clear, interchangeable
- Sealing: IP68 (dust-tight, water-sealed)
- Included: 2 handles, mounting hardware, 2 butt splices with heat shrink
- Not included: switch, power harness, extensions, splitters
- Shipping weight: 1814 g (pair)
Does it come with a switch and wiring harness?
No. The pair ships with the two handle-lights, mounting hardware, and two butt splices with heat shrink. The switch, power harness, extensions, and splitters are sold separately, so budget for those at install.
What racks does it fit?
It mounts to most aftermarket roof racks, and the same bolt-down design works on bumper, ditch, and chase racks too. Check for a flat mounting surface on your rack before ordering.
How bright is each light, and where does it point?
600 lumens per handle, aimed 30 degrees down. That puts light on the ground beside the rig for camp setup and gear access, not up into your roof.
Will the lights drain my battery?
Each handle pulls 0.4A at 13.8V, so both together draw under 1A. With a switch wired in, you can leave them off until you need them.
Is it weather-sealed?
Yes. The housing is IP68 rated, which means dust-tight and sealed against water. Wipe the lens clean now and then; no other care needed.
Can I change the lens color?
Yes. It ships with clear lenses, and they pop out for swaps. Colored or replacement lenses are sold separately.