Crosswing Side Mount Kit
Crosswing Side Mount Kit
Variable Angle Install
Like all our mounts, the Side Mount Kit allows Crosswing to be mounted at a neutral 0°, angled slightly up at 12.5°, or angled slightly down at -12.5°.
Adjusts for Your Setup
The Side Mount Kit allows for multiple mounting points, allowing you to work with your existing setup.
Low Clearance Friendly
Go low profile! This kit keeps your awning at a manageable height for garage storage.
Works With Roof Top Tents
Roof top tent taking up all of your rack space? No problem! The Side Mount Kit tucks underneath your tent and bolts directly into your rack.
Clamp Plate Compatible
For racks without t-slots, the Side Mount Kit is compatible with the Crosswing’s included clamp plates for added versatility.
No se pudo cargar la disponibilidad de retiro
Overview
The Crosswing Side Mount Kit attaches a Kammok Crosswing awning to the side of a vehicle rack, freeing the roof for a tent or cargo. It fits both Crosswing sizes and mounts to t-slot crossbars or, with the Crosswing's clamp plates, to bars without t-slots.
Key features
- Mounts the Crosswing at 0 degrees, +12.5 degrees, or -12.5 degrees
- Includes 2 side mount brackets, 2 riser brackets, and stainless steel hardware
- Powder-coated steel brackets with stainless fasteners
- Multiple mounting points adjust the awning closer to or farther from the vehicle, and higher or lower on the brackets
- Fits both Crosswing awning sizes; works with t-slot crossbars or the Crosswing's clamp plates
Use cases
Built for rigs that are already running a rooftop tent, cargo box, or full roof rack. Side-mount the awning to keep roof real estate free, or drop it low for a garage-friendly profile. Host crossbars should span at least 40 inches, be no more than 1.5 inches in tube diameter, and leave at least 4 inches of clearance between the bar and the roof.
- Mounting angles: 0 degrees, +12.5 degrees, -12.5 degrees
- Awning compatibility: Both Crosswing sizes
- Rack interface: T-slot crossbars direct; Crosswing clamp plates for bars without t-slots
- In the box: 2 side mount brackets, 2 riser brackets, stainless steel hardware
- Material: Powder-coated steel brackets, stainless steel fasteners
- Host crossbar requirements: Span 40 inches or more, tube diameter 1.5 inches or less, 4 inches or more clearance from bar to roof
- Install time: About 30 minutes
- Adjustment: Multiple mounting points for vertical height and distance from vehicle
Does this come with the Crosswing awning?
No. The Side Mount Kit is mounting hardware only — two side mount brackets, two riser brackets, and stainless steel fasteners. The Crosswing awning is sold separately.
Will it fit my roof rack?
It mounts directly to t-slot crossbars and most standard roof racks. For bars without t-slots, it works with the Crosswing's included clamp plates. Confirm your crossbars span at least 40 inches, are no more than 1.5 inches in tube diameter, and leave at least 4 inches of clearance between the bar and the roof.
Can I run it under a rooftop tent?
Yes. The kit tucks the awning beneath the tent and bolts to the rack, so the roof stays open for the tent and your other gear.
What angles can I mount the awning at?
Three positions: flat at 0 degrees, tilted up 12.5 degrees, or tilted down 12.5 degrees. The down angle helps shed rain; the up angle opens the shade footprint.
Does it hold up to heavy use?
The brackets are powder-coated steel with stainless steel hardware, so corrosion and trail use are not a concern. Re-torque the fasteners after the first few trips — bracket hardware tends to settle once it's been loaded a few times.