ARB E-Z Deflator Digital Gauge (ARB510)
ARB E-Z Deflator Digital Gauge (ARB510)
ESSENTIALS RECOVERY KIT
The ARB Essentials Recovery Kit includes an ARB 19,800 lbs. Ultra Light Snatch Block, two type S galvanized 4.75t rated shackles, one set of cow grain leather palm with cow split leather back gloves, a 10ft ARB Recovery Tree Protector, and the updated 600gsm PVC recovery bag with multiple compartments highlighted in the ARB topographic styling. When selecting a vehicle recovery strap (snatch strap) it is recommended that the minimum breaking strength of the strap should be between two and three times the gross vehicle mass (GVM) of any vehicle it is used with, and that the strap must be suited to the GVM of the lighter of the two vehicles used in the recovery process. The 17,600lbs recovery strap is therefore suitable for vehicles with a GVM between 5800 and 8800 lbs. encompassing a majority of 4WD vehicles. This is only to be used as a general guide.
- Includes one 17,600lbs recovery strap made with reinforced eyes
- CE Certified
- Kit includes a 10ft ARB tree protector
- Contains two 4.75t Type S galvanized shackles 19mm (3/4")
- The kit also contains a 19,800lbs Ultra Light snatch block
- Kit includes one pair leather gloves
- 600gsm PVC recovery bag (updated color) is easy to keep clean
- Bag features reflective strips for visibility
- Multiple compartments keep gear in place
- Bag features heavy-duty buckles, comfortable carry handle
No se pudo cargar la disponibilidad de retiro

Overview
The ARB510 combines a rapid tire deflator and a digital pressure gauge in a single handheld tool. Pull the valve core to dump air fast, reseat it, and read exact pressure on the backlit screen.
Key features
- Removes the Schrader valve core for fast deflation, then reseats to read pressure
- Digital gauge: 0-200 psi, accurate to +/- 1 psi at 15-75 psi
- Reads four units: psi, bar, kPa, and KgF
- Blue backlit LCD for low-light readings
- 250mm braided hose with brass fittings and a rubber bump guard
- Runs on 2x AAA batteries, up to ~200 hours; max supply pressure 350 psi
Use cases
Built for airing down at the trailhead before sand, rock, snow, or washboard, and topping pressure back up afterward. One tool covers all four tires and replaces a separate deflator and gauge.
- Model: ARB510
- Type: Tire deflator with digital pressure gauge
- Pressure range: 0-200 psi
- Accuracy: +/- 1 psi at 15-75 psi
- Units: psi, bar, kPa, KgF
- Max supply pressure: 350 psi (2400 kPa)
- Hose: 250mm braided, brass fittings
- Chuck: screw-on, fits all Schrader valves
- Display: blue backlit LCD
- Power: 2x AAA batteries, up to ~200 hr runtime
- Includes: deflator and carry pouch
- Warranty: 3 years
How does it deflate so fast?
The brass chuck lets you lift the Schrader valve core out of the airflow, so air dumps far quicker than pressing a pin. Reseat the core to stop and read pressure.
How accurate is the gauge?
It reads to +/- 1 psi across the 15-75 psi range, which covers the pressures most rigs air down to off-road.
What units does it display?
psi, bar, kPa, and KgF on the same screen.
Does it need batteries?
Yes, 2x AAA, good for up to about 200 hours. Carry spares on long trips since the readout is digital.
Will it fit my valves?
The screw-on chuck fits all standard Schrader valves found on most vehicle tires.
Can I air back up with it?
It reads pressure while you inflate from an external source up to a 350 psi supply, so you can check as you top off.