Rollercam Build-Your-Own Custom Cam Strap
Rollercam Build-Your-Own Custom Cam Strap
The Rollercam Build-Your-Own Custom Cam Strap is a finished, made-to-order tie-down. You spec it: pick the end type, the color, and the exact length from 1 to 20 feet, and it ships built to that order. The webbing is 1-inch high-tenacity polyester, UV-resistant and low-stretch, with a 350 lb working load.
What sets it apart is the buckle. Rollercam's patented brass-roller cam re-tensions as you pull, so you cinch tighter with less effort and the load holds without slipping under road vibration. When you're done, thumb the release and it lets go one-handed. No ratchet handle, no friction fight, no knot to pick loose with cold fingers.
Four end types cover most jobs. Straight feeds back through the cam for a clean tie-off. Loop drops over a fixed anchor or roof rail. Hook is the quick grab-and-go. Carabiner gives you a locking connection. Colors are Black, Red, Green, and Blue, so you can code a strap kit by length or by where it lives in the rig.
No se pudo cargar la disponibilidad de retiro
Overview
A build-to-order 1-inch polyester cam strap. Choose the end type, color, and exact length, 1 to 20 feet, and you get a finished strap built to spec instead of an off-the-shelf size. The patented Rollercam cam buckle re-tensions, holds without slipping, and releases one-handed.
Key features
- 1-inch high-tenacity polyester webbing - UV-resistant, low-stretch, keeps its grip wet.
- 350 lb working load - rated with a safety factor of 3.
- Patented Rollercam brass-roller cam - re-tensions as you pull and holds under vibration.
- One-handed thumb release - no ratchet bulk, no knot to pick loose.
- Four end types - Straight, Loop, Hook, or Carabiner; four colors: Black, Red, Green, Blue.
- Built to your length - any whole-foot length from 1 to 20 feet.
Use cases
Lock down overland gear at the exact length the job needs: jerry cans, recovery kit, and tools on roof racks or bed rails. Run Loop ends as fixed roof-anchor straps, Carabiner ends for a quick locking grab, and mix lengths across the rig so every tie-down is the right size with no slack tail to manage.
- Webbing width: 1 inch
- Webbing material: high-tenacity polyester, UV-resistant, low-stretch
- Lengths: 1, 2, 4, 6, 9, 12, and 20 feet
- End types: Straight, Loop, Hook, Carabiner
- Colors: Black, Red, Green, Blue
- Working load: 350 lb (safety factor of 3)
- Buckle: patented Rollercam brass-roller cam, one-handed thumb release
- Buckle hardware: corrosion-resistant alloy body, marine-grade brass roller, stainless springs and shafts
How much can a 1-inch strap hold?
350 lb working load per strap, set with a safety factor of 3, so the load it can take before failure is roughly three times higher. Stay at the 350 lb working load for tie-downs you cinch and release over and over.
Does it come with the cam buckle, or is it just webbing?
It's a finished strap with the patented Rollercam cam buckle already attached, built to the length and end type you pick. The separate 50-foot offering is a raw roll of webbing with no buckle - this Build-Your-Own listing is not that.
How does it hold up to sun, rain, and salt?
The polyester webbing is UV-resistant and resists water absorption, so it keeps its grip when wet. The cam hardware is corrosion-resistant alloy with a marine-grade brass roller and stainless internals. After salt or sand, a shot of silicone spray on the cam keeps it smooth.
How do I release it under load?
Thumb the release lever. One hand, no ratchet handle to crank back, and nothing to untie.
Which end type should I pick?
Straight feeds back through the cam for a clean tie-off and the most length flexibility. Loop drops over a fixed anchor point or roof rail. Hook is the fastest grab-and-go connection. Carabiner gives you a locking link when you want it to stay put.